VERTICAL-SNMP-REPEATER-MIB :: vrptrGroupPortCapacity

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVERTICAL-SNMP-REPEATER-MIBvrptrGroupPortCapacity

vrptrGroupPortCapacity

Module: VERTICAL-SNMP-REPEATER-MIB

OID (symbolic): VERTICAL-SNMP-REPEATER-MIB::vrptrGroupPortCapacity

OID (numeric): 1.3.6.1.4.1.2338.4.1.2.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-2147483647. Within each group, the ports are uniquely numbered in the range from 1 to vrptrGroupPortCapacity.

Some ports may not be present in the system, in which case the actual number of ports present will be less than the value of rptrGroupPortCapacity. The number of ports present in the group will never be greater than the value of rptrGroupPortCapacity.

Note: In practice, this will generally be the number of ports on a module, card, or board, and the port numbers will correspond to numbers marked on the physical embodiment.

What is vrptrGroupPortCapacity?

The number of ports this group can physically contain; ports within the group are numbered 1 through this value, though fewer ports may actually be present than the capacity allows. In practice this typically matches the port count printed on the physical module or card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2338.4.1.2.1.1.6
snmpwalk -v2c -c public <target> VERTICAL-SNMP-REPEATER-MIB::vrptrGroupPortCapacity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2338.4.1.2.1.1.6.1
snmpget -v2c -c public <target> VERTICAL-SNMP-REPEATER-MIB::vrptrGroupPortCapacity.1

Start monitoring Vertical Networks SNMP repeater/hub (per-port status/collision-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VERTICAL-SNMP-REPEATER-MIB::vrptrGroupPortCapacity OID value, configure state conditions and alerts, and monitor any Vertical Networks SNMP repeater/hub (per-port status/collision-count status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2338verticalVERTICAL-EVENTLOG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2338.4vsnmpDot3RptrMgtVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.1vrptrBasicPackageVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.1.2vrptrGroupInfoVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.1.2.1vrptrGroupTableVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.1.2.1.1vrptrGroupEntryVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.1.2.1.1.6vrptrGroupPortCapacityVERTICAL-SNMP-REPEATER-MIB