All MIBs › VERTICAL-SNMP-REPEATER-MIB › vrptrGroupLedStatus
vrptrGroupLedStatus
Module: VERTICAL-SNMP-REPEATER-MIB
OID (symbolic): VERTICAL-SNMP-REPEATER-MIB::vrptrGroupLedStatus
OID (numeric): 1.3.6.1.4.1.2338.4.1.2.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the status of the card LEDs. The LED status is shown for any card that has an Ethernet interface. Valid values are unknown (1), none(2), green(3), red(4) and greenRed(5). A status of unknown(1) indicates that the LED status is not available from the hardware and could not be determined from the card's state. A status of greenRed(5) indicates that both the green and red LEDs are ON. A status of none(2) indicates neither the green nor the red LED is ON. However, note that the green LED on the Resource Switch Card blinks every second to indicate an active Fault Monitor, and therefore, if this value is requested during the short period when the green LED is off, it will indicate that it is off.
What is vrptrGroupLedStatus?
The current color state of this card's status LEDs (unknown, none, green, red, or greenRed/both on) for any card with an Ethernet interface. Note the Resource Switch Card's green LED blinks once a second to indicate an active Fault Monitor, so a 'none' reading could just be caught during the brief off phase of that blink.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2338.4.1.2.1.1.10 snmpwalk -v2c -c public <target> VERTICAL-SNMP-REPEATER-MIB::vrptrGroupLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2338.4.1.2.1.1.10.1 snmpget -v2c -c public <target> VERTICAL-SNMP-REPEATER-MIB::vrptrGroupLedStatus.1
Start monitoring Vertical Networks SNMP repeater/hub (per-port status/collision-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VERTICAL-SNMP-REPEATER-MIB::vrptrGroupLedStatus OID value, configure state conditions and alerts, and monitor any Vertical Networks SNMP repeater/hub (per-port status/collision-count status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2338 | vertical | VERTICAL-EVENTLOG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2338.4 | vsnmpDot3RptrMgt | VERTICAL-SNMP-REPEATER-MIB |
| 1.3.6.1.4.1.2338.4.1 | vrptrBasicPackage | VERTICAL-SNMP-REPEATER-MIB |
| 1.3.6.1.4.1.2338.4.1.2 | vrptrGroupInfo | VERTICAL-SNMP-REPEATER-MIB |
| 1.3.6.1.4.1.2338.4.1.2.1 | vrptrGroupTable | VERTICAL-SNMP-REPEATER-MIB |
| 1.3.6.1.4.1.2338.4.1.2.1.1 | vrptrGroupEntry | VERTICAL-SNMP-REPEATER-MIB |
| 1.3.6.1.4.1.2338.4.1.2.1.1.10 | vrptrGroupLedStatus | VERTICAL-SNMP-REPEATER-MIB |