All MIBs › VDSL2-LINE-MIB › xdsl2SCStatusSnrMtime
xdsl2SCStatusSnrMtime
Module: VDSL2-LINE-MIB
OID (symbolic): VDSL2-LINE-MIB::xdsl2SCStatusSnrMtime
OID (numeric): 1.3.6.1.2.1.10.251.1.2.3.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description:
This parameter contains the number of symbols used to measure the SNR(f) values. It is an unsigned integer in the range from 1 to 2^16-1. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to measure the SNR(f). It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for ITU-T Recommendation G.992.3).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.251.1.2.3.1.8 snmpwalk -v2c -c public <target> VDSL2-LINE-MIB::xdsl2SCStatusSnrMtime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.251.1.2.3.1.8.1 snmpget -v2c -c public <target> VDSL2-LINE-MIB::xdsl2SCStatusSnrMtime.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.251 | vdsl2MIB | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1 | xdsl2Objects | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2 | xdsl2Status | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2.3 | xdsl2SCStatusTable | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2.3.1 | xdsl2SCStatusEntry | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2.3.1.8 | xdsl2SCStatusSnrMtime | VDSL2-LINE-MIB |