VDSL2-LINE-MIB :: xdsl2SCStatusBandSigAtten

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVDSL2-LINE-MIBxdsl2SCStatusBandSigAtten

xdsl2SCStatusBandSigAtten

Module: VDSL2-LINE-MIB

OID (symbolic): VDSL2-LINE-MIB::xdsl2SCStatusBandSigAtten

OID (numeric): 1.3.6.1.2.1.10.251.1.2.4.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all subcarriers during Showtime after the diagnostics mode. When referring to the upstream direction, it is the measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all subcarriers during Showtime after the diagnostics mode. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.251.1.2.4.1.3
snmpwalk -v2c -c public <target> VDSL2-LINE-MIB::xdsl2SCStatusBandSigAtten

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.251.1.2.4.1.3.1
snmpget -v2c -c public <target> VDSL2-LINE-MIB::xdsl2SCStatusBandSigAtten.1

Start monitoring vendor-neutral, standards-based MIB, DSL access multiplexers (DSLAMs), VDSL2/ADSL modems and routers (line up/down/template/diagnostic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VDSL2-LINE-MIB::xdsl2SCStatusBandSigAtten OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, DSL access multiplexers (DSLAMs), VDSL2/ADSL modems and routers (line up/down/template/diagnostic status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.251vdsl2MIBVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1xdsl2ObjectsVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.2xdsl2StatusVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.2.4xdsl2SCStatusBandTableVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.2.4.1xdsl2SCStatusBandEntryVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.2.4.1.3xdsl2SCStatusBandSigAttenVDSL2-LINE-MIB