All MIBs › VDSL2-LINE-MIB › xdsl2SCStatusBandLnAtten
xdsl2SCStatusBandLnAtten
Module: VDSL2-LINE-MIB
OID (symbolic): VDSL2-LINE-MIB::xdsl2SCStatusBandLnAtten
OID (numeric): 1.3.6.1.2.1.10.251.1.2.4.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all subcarriers during diagnostics mode. When referring to a band in the upstream direction, it is the measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all subcarriers during diagnostics mode. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.
What is xdsl2SCStatusBandLnAtten?
Reports line attenuation for one frequency band as measured specifically during a loop diagnostic (DELT) run, in units of 0.1 dB, frozen until the row is deleted or a new diagnostic is initiated. This is the diagnostic-mode counterpart to the live xdsl2LineBandStatusLnAtten object, letting an admin compare a captured baseline against current live readings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.251.1.2.4.1.2 snmpwalk -v2c -c public <target> VDSL2-LINE-MIB::xdsl2SCStatusBandLnAtten
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.251.1.2.4.1.2.1 snmpget -v2c -c public <target> VDSL2-LINE-MIB::xdsl2SCStatusBandLnAtten.1
Start monitoring vendor-neutral, standards-based MIB, DSL access multiplexers (DSLAMs), VDSL2/ADSL modems and routers (line up/down/template/diagnostic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VDSL2-LINE-MIB::xdsl2SCStatusBandLnAtten OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, DSL access multiplexers (DSLAMs), VDSL2/ADSL modems and routers (line up/down/template/diagnostic status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.251 | vdsl2MIB | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1 | xdsl2Objects | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2 | xdsl2Status | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2.4 | xdsl2SCStatusBandTable | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2.4.1 | xdsl2SCStatusBandEntry | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.2.4.1.2 | xdsl2SCStatusBandLnAtten | VDSL2-LINE-MIB |