All MIBs › VDSL2-LINE-MIB › xdsl2LineCmndConfReset
xdsl2LineCmndConfReset
Module: VDSL2-LINE-MIB
OID (symbolic): VDSL2-LINE-MIB::xdsl2LineCmndConfReset
OID (numeric): 1.3.6.1.2.1.10.251.1.1.1.1.11
Node type: OBJECT-TYPE
Type: Xdsl2LineReset
Access: read-write
Description: Request a line reset to occur. If this object is set to the value of 'reset', then force the line to reset (i.e., the modems will retrain). When the line has successfully reset, the SNMP agent will set the value of this object to 'idle'.
Note that the xdsl2LineCmndConfPmsf object will always take precedence over this object. If the xdsl2LineCmndConfPmsf object is set to the value 'l0orL2toL3', then the line MUST NOT return to the Showtime state due to a reset request action performed using this object.
What is xdsl2LineCmndConfReset?
Setting this object to 'reset' forces the line to retrain (drop and re-establish the DSL session); the agent sets it back to 'idle' once the reset completes. It's the SNMP equivalent of power-cycling the modem's sync, though xdsl2LineCmndConfPmsf takes precedence, so a line forced to stay in L0/L2-to-L3 by that object will not drop to Showtime just because of this reset request.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.251.1.1.1.1.11 snmpwalk -v2c -c public <target> VDSL2-LINE-MIB::xdsl2LineCmndConfReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.251.1.1.1.1.11.1 snmpget -v2c -c public <target> VDSL2-LINE-MIB::xdsl2LineCmndConfReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.251.1.1.1.1.11.1 s <value>
Start monitoring vendor-neutral, standards-based MIB, DSL access multiplexers (DSLAMs), VDSL2/ADSL modems and routers (line up/down/template/diagnostic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VDSL2-LINE-MIB::xdsl2LineCmndConfReset OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, DSL access multiplexers (DSLAMs), VDSL2/ADSL modems and routers (line up/down/template/diagnostic status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.251 | vdsl2MIB | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1 | xdsl2Objects | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.1 | xdsl2Line | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.1.1 | xdsl2LineTable | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.1.1.1 | xdsl2LineEntry | VDSL2-LINE-MIB |
| 1.3.6.1.2.1.10.251.1.1.1.1.11 | xdsl2LineCmndConfReset | VDSL2-LINE-MIB |