VDSL2-LINE-MIB :: xdsl2LConfProfUpboKL

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › VDSL2-LINE-MIB › xdsl2LConfProfUpboKL

xdsl2LConfProfUpboKL

Module: VDSL2-LINE-MIB

OID (symbolic): VDSL2-LINE-MIB::xdsl2LConfProfUpboKL

OID (numeric): 1.3.6.1.2.1.10.251.1.5.1.2.1.44

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: This configuration parameter defines the electrical length expressed in dB at 1 MHz, kl0, configured by the CO-MIB. The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. This parameter is relevant only if xdsl2LConfProfUpboKLF is set to 'override(2)', which indicates that this parameter's value will override the VTUs' determination of the electrical length. If xdsl2LConfProfUpboKLF is set either to auto(1) or disableUpbo(3), then this parameter will be ignored.

What is xdsl2LConfProfUpboKL?

Sets the electrical length (kl0), in units of 0.1 dB at 1 MHz (0-1280, i.e. 0-128 dB), that the CO-side management system forces for upstream power back-off (UPBO) calculations; it only takes effect when xdsl2LConfProfUpboKLF is set to 'override', otherwise the value is ignored and the VTUs determine electrical length themselves. An operator overrides this on cabinet deployments where the automatic estimate doesn't match the known cable length.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.251vdsl2MIBVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1xdsl2ObjectsVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5xdsl2ProfileVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1xdsl2ProfileLineVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1.2xdsl2LineConfProfTableVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1.2.1xdsl2LineConfProfEntryVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1.2.1.44xdsl2LConfProfUpboKLVDSL2-LINE-MIB