VDSL2-LINE-MIB :: xdsl2LConfProfMinSnrmDs

MIB Reference — IPNetwork Monitor

All MIBs › VDSL2-LINE-MIB › xdsl2LConfProfMinSnrmDs

xdsl2LConfProfMinSnrmDs

Module: VDSL2-LINE-MIB

OID (symbolic): VDSL2-LINE-MIB::xdsl2LConfProfMinSnrmDs

OID (numeric): 1.3.6.1.2.1.10.251.1.5.1.2.1.20

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description:

The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU-C transmit power. If an increase to xTU-C transmit power is not possible, a loss- of-margin (LOM) defect occurs, the xTU-R shall fail and attempt to reinitialize and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). A value of 0 means that there is no minimum.

What is xdsl2LConfProfMinSnrmDs?

This OID stores the minimum signal-to-noise margin threshold (measured in 1/10-dB units, range 0-310) that an xDSL2 receiver must maintain for a broadband connection. If signal quality drops below this threshold, the receiver requests power increase or the line will fail and attempt reconnection. A network operator sets this value based on line stability requirements—higher values mean stricter quality demands but better resilience to interference.

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.2mgmtBKTEL-HFC862-BASE-MIB
1.3.6.1.2.1mib_2CHECKPOINT-MIB-2
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.251vdsl2MIBVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1xdsl2ObjectsVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5xdsl2ProfileVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1xdsl2ProfileLineVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1.2xdsl2LineConfProfTableVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1.2.1xdsl2LineConfProfEntryVDSL2-LINE-MIB
1.3.6.1.2.1.10.251.1.5.1.2.1.20xdsl2LConfProfMinSnrmDsVDSL2-LINE-MIB

Module

This MIB depends on