All MIBs › Unisphere-Data-V35-MIB › usdV35IfClockRate
usdV35IfClockRate
Module: Unisphere-Data-V35-MIB
OID (symbolic): Unisphere-Data-V35-MIB::usdV35IfClockRate
OID (numeric): 1.3.6.1.4.1.4874.2.2.59.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 6144000, and 8192000. If a value other than one of the predefined values is set, then the closest matching value is used.
The clock rate parameter is only meaningful when the interface is in DCE mode. When the interface is in DTE mode, the value is simply ignored.
What is usdV35IfClockRate?
This object sets the clock rate in hertz for the X.21/V.35 interface, restricted to a fixed list of standard rates such as 64000, 1536000, or 2048000, with the nearest valid rate substituted if an unsupported value is set. It only takes effect when the interface is in DCE mode, since a DTE-mode interface ignores this setting and instead receives clocking from the far end. For example, an admin provisioning a T1-equivalent serial link in DCE mode would set this to 1536000 to match the circuit's expected bandwidth.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.59.1.2.1.4 snmpwalk -v2c -c public <target> Unisphere-Data-V35-MIB::usdV35IfClockRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.59.1.2.1.4.1 snmpget -v2c -c public <target> Unisphere-Data-V35-MIB::usdV35IfClockRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.59.1.2.1.4.1 i <value>
Start monitoring Juniper/Unisphere ERX edge router with V.35/X.21 serial WAN interfaces (clock-rate/loopback config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-V35-MIB::usdV35IfClockRate OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX edge router with V.35/X.21 serial WAN interfaces (clock-rate/loopback config status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.59 | juniV35MIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.59.1 | juniV35Objects | Juniper-V35-MIB |
| 1.3.6.1.4.1.4874.2.2.59.1.2 | juniV35IfTable | Juniper-V35-MIB |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1 | juniV35IfEntry | Juniper-V35-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.4 | usdV35IfClockRate | Unisphere-Data-V35-MIB |