All MIBs › Unisphere-Data-MPLS-MIB › usdMplsIfMajorNextIfIndex
usdMplsIfMajorNextIfIndex
Module: Unisphere-Data-MPLS-MIB
OID (symbolic): Unisphere-Data-MPLS-MIB::usdMplsIfMajorNextIfIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.54.1.2.1.1
Node type: OBJECT-TYPE
Type: UsdNextIfIndex
Access: read-only
Description: Coordinate ifIndex value allocation for entries in the usdMplsIfMajorTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
What is usdMplsIfMajorNextIfIndex?
A read-only helper that returns the next available ifIndex value to use when creating a new entry in usdMplsIfMajorTable, or zero if none is available; successive reads typically return different values so multiple management stations creating interfaces at once don't collide.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.2.1.1 snmpwalk -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsIfMajorNextIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.2.1.1.1 snmpget -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsIfMajorNextIfIndex.1
Start monitoring Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-MPLS-MIB::usdMplsIfMajorNextIfIndex OID value, configure state conditions and alerts, and monitor any Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54 | juniMplsMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54.1 | juniMplsObjects | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.2 | juniMplsMajorLayer | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1 | juniMplsIfMajorLayer | Juniper-MPLS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.1 | usdMplsIfMajorNextIfIndex | Unisphere-Data-MPLS-MIB |