All MIBs › Unisphere-Data-MPLS-MIB › usdMplsGroupMplsEnable
usdMplsGroupMplsEnable
Module: Unisphere-Data-MPLS-MIB
OID (symbolic): Unisphere-Data-MPLS-MIB::usdMplsGroupMplsEnable
OID (numeric): 1.3.6.1.4.1.4874.2.2.54.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables or disables MPLS on the virtual router. When MPLS is created on the virtual router (VR), it remains adminstratively disabled untill it is enabled explicitly. Without administratively enabling the MPLS on VR, it won't function as an LSR even though it holds the MPLS configurations until the MPLS context is destroyed for the VR.
What is usdMplsGroupMplsEnable?
Turns MPLS on for this virtual router; even after MPLS is created on the VR it stays administratively disabled, holding its configuration but not acting as a label switching router, until an admin explicitly sets this to enable(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.1 snmpwalk -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsGroupMplsEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.1.1 snmpget -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsGroupMplsEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usdMplsGroupMplsEnable.1
Start monitoring Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-MPLS-MIB::usdMplsGroupMplsEnable OID value, configure state conditions and alerts, and monitor any Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54 | juniMplsMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54.1 | juniMplsObjects | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1 | juniMplsLsrGlobalConfig | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1 | juniMplsGroup | Juniper-MPLS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.1 | usdMplsGroupMplsEnable | Unisphere-Data-MPLS-MIB |