All MIBs › Unisphere-Data-MPLS-MIB › usdMplsGroupLspRetryInterval
usdMplsGroupLspRetryInterval
Module: Unisphere-Data-MPLS-MIB
OID (symbolic): Unisphere-Data-MPLS-MIB::usdMplsGroupLspRetryInterval
OID (numeric): 1.3.6.1.4.1.4874.2.2.54.1.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Use this object to configure the time interval between two LSP setup retries after a failure other than one due to no available route.
What is usdMplsGroupLspRetryInterval?
How many seconds the router waits between successive LSP setup retries after a non-routing failure; defaults to 5 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.8 snmpwalk -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsGroupLspRetryInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.8.1 snmpget -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsGroupLspRetryInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.8.1 i <value>
Start monitoring Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-MPLS-MIB::usdMplsGroupLspRetryInterval OID value, configure state conditions and alerts, and monitor any Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54 | juniMplsMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54.1 | juniMplsObjects | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1 | juniMplsLsrGlobalConfig | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1 | juniMplsGroup | Juniper-MPLS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.8 | usdMplsGroupLspRetryInterval | Unisphere-Data-MPLS-MIB |