Unisphere-Data-MPLS-MIB :: usdMplsGroupLdpRetryIntervalNoroute

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Unisphere-Data-MPLS-MIB › usdMplsGroupLdpRetryIntervalNoroute

usdMplsGroupLdpRetryIntervalNoroute

Module: Unisphere-Data-MPLS-MIB

OID (symbolic): Unisphere-Data-MPLS-MIB::usdMplsGroupLdpRetryIntervalNoroute

OID (numeric): 1.3.6.1.4.1.4874.2.2.54.1.1.1.10

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Use this object to configure the time interval between two successive LSP setup retries by LDP after a failure due to no available route.

What is usdMplsGroupLdpRetryIntervalNoroute?

How many seconds LDP waits between successive LSP setup retries after a no-route failure; defaults to 30 seconds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.10
snmpwalk -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsGroupLdpRetryIntervalNoroute

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.10.1
snmpget -v2c -c public <target> Unisphere-Data-MPLS-MIB::usdMplsGroupLdpRetryIntervalNoroute.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.10.1 i <value>

Start monitoring Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-MPLS-MIB::usdMplsGroupLdpRetryIntervalNoroute OID value, configure state conditions and alerts, and monitor any Unisphere/Juniper ERX MPLS-enabled router (LSR/tunnel/LDP-RSVP session status) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.54juniMplsMIBJuniper-MIBs
1.3.6.1.4.1.4874.2.2.54.1juniMplsObjectsJuniper-MPLS-MIB
1.3.6.1.4.1.4874.2.2.54.1.1juniMplsLsrGlobalConfigJuniper-MPLS-MIB
1.3.6.1.4.1.4874.2.2.54.1.1.1juniMplsGroupJuniper-MPLS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.54.1.1.1.10usdMplsGroupLdpRetryIntervalNorouteUnisphere-Data-MPLS-MIB