All MIBs › Unisphere-Data-L2TP-MIB › usdL2tpTunnelStatusRemoteHostName
usdL2tpTunnelStatusRemoteHostName
Module: Unisphere-Data-L2TP-MIB
OID (symbolic): Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteHostName
OID (numeric): 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero-length string if no name was previously known.
What is usdL2tpTunnelStatusRemoteHostName?
The host name the peer advertised in its Host Name AVP during tunnel setup; retains its last known value if the tunnel later goes idle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8 snmpwalk -v2c -c public <target> Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteHostName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8.1 snmpget -v2c -c public <target> Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteHostName.1
Start monitoring Juniper/Unisphere ERX edge routing switch, LAC/LNS (L2TP tunnel/destination-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteHostName OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX edge routing switch, LAC/LNS (L2TP tunnel/destination-count status) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.35 | juniL2tpMIB | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1 | juniL2tpObjects | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3 | juniL2tpTunnel | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2 | juniL2tpTunnelStatus | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1 | juniL2tpTunnelStatusTable | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1 | juniL2tpTunnelStatusEntry | Juniper-L2TP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8 | usdL2tpTunnelStatusRemoteHostName | Unisphere-Data-L2TP-MIB |