All MIBs › Unisphere-Data-L2TP-MIB › usdL2tpTunnelStatusRemoteFirmwareRevision
usdL2tpTunnelStatusRemoteFirmwareRevision
Module: Unisphere-Data-L2TP-MIB
OID (symbolic): Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteFirmwareRevision
OID (numeric): 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value if no revision was previously known.
What is usdL2tpTunnelStatusRemoteFirmwareRevision?
The peer's firmware revision number as advertised during tunnel setup; retains its last known value while the tunnel is idle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10 snmpwalk -v2c -c public <target> Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteFirmwareRevision
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10.1 snmpget -v2c -c public <target> Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteFirmwareRevision.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usdL2tpTunnelStatusRemoteFirmwareRevision.1
Start monitoring Juniper/Unisphere ERX edge routing switch, LAC/LNS (L2TP tunnel/destination-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2TP-MIB::usdL2tpTunnelStatusRemoteFirmwareRevision OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX edge routing switch, LAC/LNS (L2TP tunnel/destination-count status) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.35 | juniL2tpMIB | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1 | juniL2tpObjects | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3 | juniL2tpTunnel | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2 | juniL2tpTunnelStatus | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1 | juniL2tpTunnelStatusTable | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1 | juniL2tpTunnelStatusEntry | Juniper-L2TP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10 | usdL2tpTunnelStatusRemoteFirmwareRevision | Unisphere-Data-L2TP-MIB |