All MIBs › Unisphere-Data-L2TP-MIB › usdL2tpSysConfigTunnelSwitchingEnabled
usdL2tpSysConfigTunnelSwitchingEnabled
Module: Unisphere-Data-L2TP-MIB
OID (symbolic): Unisphere-Data-L2TP-MIB::usdL2tpSysConfigTunnelSwitchingEnabled
OID (numeric): 1.3.6.1.4.1.4874.2.2.35.1.1.1.4
Node type: OBJECT-TYPE
Type: UsdEnable
Access: read-write
Description: Tunnel switching enabled/disable.
What is usdL2tpSysConfigTunnelSwitchingEnabled?
Enables or disables L2TP tunnel switching (this box acting as an intermediate hop that relays sessions between two tunnels) system-wide; defaults to disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.4 snmpwalk -v2c -c public <target> Unisphere-Data-L2TP-MIB::usdL2tpSysConfigTunnelSwitchingEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.4.1 snmpget -v2c -c public <target> Unisphere-Data-L2TP-MIB::usdL2tpSysConfigTunnelSwitchingEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.4.1 s <value>
Start monitoring Juniper/Unisphere ERX edge routing switch, LAC/LNS (L2TP tunnel/destination-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-L2TP-MIB::usdL2tpSysConfigTunnelSwitchingEnabled OID value, configure state conditions and alerts, and monitor any Juniper/Unisphere ERX edge routing switch, LAC/LNS (L2TP tunnel/destination-count status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.35 | juniL2tpMIB | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1 | juniL2tpObjects | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1 | juniL2tpSystem | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1 | juniL2tpSystemConfig | Juniper-L2TP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.4 | usdL2tpSysConfigTunnelSwitchingEnabled | Unisphere-Data-L2TP-MIB |