All MIBs › Unisphere-Data-ISIS-MIB › usdIsisSysL2CircAuthenticationStartGenerateTime
usdIsisSysL2CircAuthenticationStartGenerateTime
Module: Unisphere-Data-ISIS-MIB
OID (symbolic): Unisphere-Data-ISIS-MIB::usdIsisSysL2CircAuthenticationStartGenerateTime
OID (numeric): 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7
Node type: OBJECT-TYPE
Type: AuthTime
Access: read-write
Description: The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.
What is usdIsisSysL2CircAuthenticationStartGenerateTime?
Sets the date/time this Level 2 circuit authentication key starts being used to sign transmitted IIH packets; defaults to key creation time plus two minutes. An admin uses this to delay switching to a new backbone hello key on this circuit until the neighbor has had time to learn it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 snmpwalk -v2c -c public <target> Unisphere-Data-ISIS-MIB::usdIsisSysL2CircAuthenticationStartGenerateTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7.1 snmpget -v2c -c public <target> Unisphere-Data-ISIS-MIB::usdIsisSysL2CircAuthenticationStartGenerateTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7.1 s <value>
Start monitoring Unisphere Networks (Juniper E-series/ERX) routing switches, IS-IS (timer config/protocol-error counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-ISIS-MIB::usdIsisSysL2CircAuthenticationStartGenerateTime OID value, configure state conditions and alerts, and monitor any Unisphere Networks (Juniper E-series/ERX) routing switches, IS-IS (timer config/protocol-error counter status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.38 | juniIsisMIB | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1 | juniIsisObjects | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.2 | juniIsisCircuitGroup | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3 | juniIsisSysL2CircAuthenticationTable | Juniper-ISIS-MIB |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1 | juniIsisSysL2CircAuthenticationEntry | Juniper-ISIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 | usdIsisSysL2CircAuthenticationStartGenerateTime | Unisphere-Data-ISIS-MIB |