Unisphere-Data-FRAME-RELAY-MIB :: usdFrDlcmiStatsDiscontinuityTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsUnisphere-Data-FRAME-RELAY-MIBusdFrDlcmiStatsDiscontinuityTime

usdFrDlcmiStatsDiscontinuityTime

Module: Unisphere-Data-FRAME-RELAY-MIB

OID (symbolic): Unisphere-Data-FRAME-RELAY-MIB::usdFrDlcmiStatsDiscontinuityTime

OID (numeric): 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-only

Description: Value of sysUpTime at the most recent event that caused a discontinuity in the monotonic operation of any of the counters in this entry. Such disruption might be caused by:

Hardware insertion/removal. Reconfiguration of usdFrDlcmiState. Reconfiguration of usdFrDlcmiRole.

Conclusions can be drawn from successive polls of an entry's counters only if the value of this object, simultaneously retrieved in those polls, remains unchanged.

What is usdFrDlcmiStatsDiscontinuityTime?

This reports the sysUpTime value at the last event that caused a discontinuity in this DLCMI's counters (e.g. hardware reinsertion, or reconfiguring usdFrDlcmiState or usdFrDlcmiRole); an admin should only trust counter deltas between two polls if this value stayed the same across both.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17
snmpwalk -v2c -c public <target> Unisphere-Data-FRAME-RELAY-MIB::usdFrDlcmiStatsDiscontinuityTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17.1
snmpget -v2c -c public <target> Unisphere-Data-FRAME-RELAY-MIB::usdFrDlcmiStatsDiscontinuityTime.1

Start monitoring Unisphere Networks (Juniper E-series/ERX) routing switches (Frame Relay DLCMI config/statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-FRAME-RELAY-MIB::usdFrDlcmiStatsDiscontinuityTime OID value, configure state conditions and alerts, and monitor any Unisphere Networks (Juniper E-series/ERX) routing switches (Frame Relay DLCMI config/statistics status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.10juniFrameRelayMIBJuniper-FRAME-RELAY-MIB
1.3.6.1.4.1.4874.2.2.10.1juniFrObjectsJuniper-FRAME-RELAY-MIB
1.3.6.1.4.1.4874.2.2.10.1.1juniFrIfLayerJuniper-FRAME-RELAY-MIB
1.3.6.1.4.1.4874.2.2.10.1.1.3juniFrDlcmiStatsTableJuniper-FRAME-RELAY-MIB
1.3.6.1.4.1.4874.2.2.10.1.1.3.1juniFrDlcmiStatsEntryJuniper-FRAME-RELAY-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17usdFrDlcmiStatsDiscontinuityTimeUnisphere-Data-FRAME-RELAY-MIB