All MIBs › UDPLITE-MIB › udpliteEndpointProcess
udpliteEndpointProcess
Module: UDPLITE-MIB
OID (symbolic): UDPLITE-MIB::udpliteEndpointProcess
OID (numeric): 1.3.6.1.2.1.170.1.8.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: A unique value corresponding to a piece of software running on this endpoint.
If this endpoint is associated with more than one piece of software, the agent should choose one of these. As long as the representative piece of software is running and still associated with the endpoint, subsequent reads will consistently return the same value. The implementation may use any algorithm satisfying these constraints (e.g., choosing the entity
with the oldest start time).
This identifier is platform-specific. Wherever possible, it should use the system's native, unique identification number as the value.
If the SYSAPPL-MIB module is available, the value should be the same as sysApplElmtRunIndex. If not available, an alternative should be used (e.g., the hrSWRunIndex of the HOST-RESOURCES-MIB module).
If it is not possible to uniquely identify the pieces of software associated with this endpoint, then the value zero should be used. (Note that zero is otherwise a valid value for sysApplElmtRunIndex.)
What is udpliteEndpointProcess?
Holds a platform-specific identifier for the software process associated with this UDP-Lite endpoint, ideally matching sysApplElmtRunIndex or an equivalent like hrSWRunIndex, with 0 used if the process can't be uniquely identified. Admins use this to trace a specific UDP-Lite socket/connection back to the local application or process that owns it, useful when correlating network endpoints with running software. An admin investigating unexpected UDP-Lite traffic on a port would cross-reference udpliteEndpointProcess against the HOST-RESOURCES-MIB process table to identify exactly which running process opened that endpoint.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.170.1.8.1.8 snmpwalk -v2c -c public <target> UDPLITE-MIB::udpliteEndpointProcess
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.170.1.8.1.8.1 snmpget -v2c -c public <target> UDPLITE-MIB::udpliteEndpointProcess.1
Start monitoring vendor-neutral, standards-based MIB, any host or network device implementing UDP-Lite (datagram/checksum-error counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UDPLITE-MIB::udpliteEndpointProcess OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, any host or network device implementing UDP-Lite (datagram/checksum-error counter status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.170 | udpliteMIB | UDPLITE-MIB |
| 1.3.6.1.2.1.170.1 | udplite | UDPLITE-MIB |
| 1.3.6.1.2.1.170.1.8 | udpliteEndpointTable | UDPLITE-MIB |
| 1.3.6.1.2.1.170.1.8.1 | udpliteEndpointEntry | UDPLITE-MIB |
| 1.3.6.1.2.1.170.1.8.1.8 | udpliteEndpointProcess | UDPLITE-MIB |