All MIBs › UBQS-SLD-MIB › ubiSldIfStateChangeEnabled
ubiSldIfStateChangeEnabled
Module: UBQS-SLD-MIB
OID (symbolic): UBQS-SLD-MIB::ubiSldIfStateChangeEnabled
OID (numeric): 1.3.6.1.4.1.7800.100.25.1.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: It is enable to sending SLD SNMP trap message
What is ubiSldIfStateChangeEnabled?
ubiSldIfStateChangeEnabled is a read-write TruthValue globally enabling the sending of SLD SNMP trap messages when an interface's SLD state changes. Admins enable this so their monitoring system receives real-time notifications whenever SLD disables or recovers a port due to a detected self-loop, rather than only being visible via polling. For example, an admin integrating loop detection with their NMS alerting would set ubiSldIfStateChangeEnabled to true so a trap fires the moment a port is err-disabled by SLD.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.25.1.1.6 snmpwalk -v2c -c public <target> UBQS-SLD-MIB::ubiSldIfStateChangeEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.25.1.1.6.1 snmpget -v2c -c public <target> UBQS-SLD-MIB::ubiSldIfStateChangeEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.25.1.1.6.1 s <value>
Start monitoring Ubiquoss Corp. switching equipment, self loop detection (error-disabled port/recovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SLD-MIB::ubiSldIfStateChangeEnabled OID value, configure state conditions and alerts, and monitor any Ubiquoss Corp. switching equipment, self loop detection (error-disabled port/recovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.25 | ubiSldMIB | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1 | ubiSldMIBObjects | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.1 | ubiSldGlobal | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.1.6 | ubiSldIfStateChangeEnabled | UBQS-SLD-MIB |