All MIBs › UBQS-SLD-MIB › ubiSldIfRecoveryTime
ubiSldIfRecoveryTime
Module: UBQS-SLD-MIB
OID (symbolic): UBQS-SLD-MIB::ubiSldIfRecoveryTime
OID (numeric): 1.3.6.1.4.1.7800.100.25.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When it is configured, if interface is disabled by SLD, interface automatically recover after recovery time.
What is ubiSldIfRecoveryTime?
ubiSldIfRecoveryTime is a read-write Integer32, in minutes (with 0 meaning disable), specifying that if this interface is disabled by SLD, it automatically recovers after this recovery time. Admins set this per-interface value to control auto-recovery behavior for a specific port after a detected loop, overriding the global ubiSldRecoveryTime for that port. For example, an admin might set ubiSldIfRecoveryTime to disable(0) on a critical uplink port so it requires manual intervention rather than auto-recovering after a loop event.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.25.1.2.1.3 snmpwalk -v2c -c public <target> UBQS-SLD-MIB::ubiSldIfRecoveryTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.25.1.2.1.3.1 snmpget -v2c -c public <target> UBQS-SLD-MIB::ubiSldIfRecoveryTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.25.1.2.1.3.1 i <value>
Start monitoring Ubiquoss Corp. switching equipment, self loop detection (error-disabled port/recovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SLD-MIB::ubiSldIfRecoveryTime OID value, configure state conditions and alerts, and monitor any Ubiquoss Corp. switching equipment, self loop detection (error-disabled port/recovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.25 | ubiSldMIB | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1 | ubiSldMIBObjects | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.2 | ubiSldIfTable | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.2.1 | ubiSldIfEntry | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.2.1.3 | ubiSldIfRecoveryTime | UBQS-SLD-MIB |