All MIBs › UBQS-SLD-MIB › ubiSldIfHelloInterval
ubiSldIfHelloInterval
Module: UBQS-SLD-MIB
OID (symbolic): UBQS-SLD-MIB::ubiSldIfHelloInterval
OID (numeric): 1.3.6.1.4.1.7800.100.25.1.2.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: It is changed SLD hello interval.
What is ubiSldIfHelloInterval?
ubiSldIfHelloInterval is a read-write Integer32, in seconds, specifying this interface's SLD hello interval, overriding the global ubiSldHelloInterval for this specific port. Admins use this to tune loop-detection responsiveness on a per-port basis, for example sending hellos more frequently on ports considered higher-risk for accidental loops. For example, an admin might set a shorter ubiSldIfHelloInterval on an access port serving end-user cabling than on a trusted uplink port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.25.1.2.1.2 snmpwalk -v2c -c public <target> UBQS-SLD-MIB::ubiSldIfHelloInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.25.1.2.1.2.1 snmpget -v2c -c public <target> UBQS-SLD-MIB::ubiSldIfHelloInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.25.1.2.1.2.1 i <value>
Start monitoring Ubiquoss Corp. switching equipment, self loop detection (error-disabled port/recovery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SLD-MIB::ubiSldIfHelloInterval OID value, configure state conditions and alerts, and monitor any Ubiquoss Corp. switching equipment, self loop detection (error-disabled port/recovery status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.25 | ubiSldMIB | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1 | ubiSldMIBObjects | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.2 | ubiSldIfTable | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.2.1 | ubiSldIfEntry | UBQS-SLD-MIB |
| 1.3.6.1.4.1.7800.100.25.1.2.1.2 | ubiSldIfHelloInterval | UBQS-SLD-MIB |