UBNT-EdgeMAX-MIB

All MIBs › UBNT-EdgeMAX-MIB

Organization: Ubiquiti Networks, Inc.

Last Updated: 2018-01-03

Category: Ubiquiti Networks

Description: Monitors Ubiquiti EdgeMAX router and switch performance, interface stats, and routing information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBNT-EdgeMAX-MIB?

UBNT-EdgeMAX-MIB is Ubiquiti Networks' vendor MIB for its EdgeMAX line of routers and switches (EdgeRouter/EdgeSwitch), providing SNMP visibility into device performance and networking state. It generally exposes interface statistics, routing/forwarding information, and overall system performance metrics for these small-to-midsize business networking appliances. It supports monitoring of hardware/software status such as interface throughput and error counts, and general device performance, which administrators use to catch link flaps, packet loss, or resource strain on the router/switch. It builds on standard IF-MIB and SNMPv2-SMI conventions typical of vendor-neutral interface monitoring, extended with EdgeMAX-specific objects. It is typically deployed in small business or prosumer network environments running EdgeOS on Ubiquiti EdgeRouter or EdgeSwitch hardware, where UBNT-EdgeMAX-MIB SNMP monitoring helps catch link flaps and resource strain early.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBNT-EdgeMAX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquiti EdgeRouter
Ubiquiti EdgeSwitch

Monitoring Examples

No sample object names were provided for this MIB, so specifics beyond the general interface and routing statistics described in its module description cannot be grounded further; a typical use would be polling interface tables for packet/error counters to detect a flapping WAN link or an overloaded switch port, but exact table/object names should be confirmed against the actual MIB source.

What Can Be Monitored

interface performance statistics
routing information
general device performance metrics

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

From UBNT-MIB

ubntEdgeMaxGroups	OBJECT-IDENTITY
ubntMIB	MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using ubntPowerOutVoltage OID:

Select an Ubiquiti EdgeRouter, Ubiquiti EdgeSwitch (interface throughput/error counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ubntPowerOutVoltage into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the output voltage in mV. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubntEdgeMax	1.3.6.1.4.1.41112.1.5			The EdgeMax MIB module for Ubiquiti Networks, Inc. entities
ubntFanEntry	1.3.6.1.4.1.41112.1.5.5.2.1		not-accessible	An entry in the ubntFansTable.
I32 ubntFanIndex	1.3.6.1.4.1.41112.1.5.5.2.1.1	Integer32	read-only	A unique value for fan.
I32 ubntFanRpm	1.3.6.1.4.1.41112.1.5.5.2.1.3	Integer32	read-only	Fan RPM.
ubntFans	1.3.6.1.4.1.41112.1.5.5
U32 ubntFansCount	1.3.6.1.4.1.41112.1.5.5.1	Unsigned32	read-only	The number of installed fans on this system.
ubntFansTable	1.3.6.1.4.1.41112.1.5.5.2		not-accessible	A list of fan entries. The number of entries is given by the value of ubntFansCount.
INT ubntFanType	1.3.6.1.4.1.41112.1.5.5.2.1.2	INTEGER	read-only	Type of fan.
STR ubntModel	1.3.6.1.4.1.41112.1.5.1.1	DisplayString	read-only	Product model.
I32 ubntPowerOutCurrent	1.3.6.1.4.1.41112.1.5.2.2.1.3	Integer32	read-only	Output current in mA.
ubntPowerOutEntry	1.3.6.1.4.1.41112.1.5.2.2.1		not-accessible	An entry in the ubntPowerOutTable.
I32 ubntPowerOutIndex	1.3.6.1.4.1.41112.1.5.2.2.1.1	Integer32	read-only	A unique value for each power output.
I32 ubntPowerOutPower	1.3.6.1.4.1.41112.1.5.2.2.1.4	Integer32	read-only	Output power in mW.
ubntPowerOuts	1.3.6.1.4.1.41112.1.5.2
U32 ubntPowerOutsCount	1.3.6.1.4.1.41112.1.5.2.1	Unsigned32	read-only	The number of power outputs present on this system.
ubntPowerOutTable	1.3.6.1.4.1.41112.1.5.2.2		not-accessible	A list of power out entries. The number of entries is given by the value of ubntPowerOutsCount.
I32 ubntPowerOutVoltageEx	1.3.6.1.4.1.41112.1.5.2.2.1.2	Integer32	read-only	Output voltage in mV.
ubntPowerSupplies	1.3.6.1.4.1.41112.1.5.3
ubntProductIdent	1.3.6.1.4.1.41112.1.5.1
INT ubntPsuBatteryChargeLevel	1.3.6.1.4.1.41112.1.5.3.2.1.9	INTEGER	read-only	Current battery charge level as a percent (0-100%).
STR ubntPsuBatteryLastReplaceDate	1.3.6.1.4.1.41112.1.5.3.2.1.12	DisplayString	read-only	Battery installation date (mm/dd/yyyy).
I32 ubntPsuBatteryQuantity	1.3.6.1.4.1.41112.1.5.3.2.1.8	Integer32	read-only	Number of batteries connected to PSU.
INT ubntPsuBatteryReplaceIndicator	1.3.6.1.4.1.41112.1.5.3.2.1.11	INTEGER	read-only	Indicates whether the batteries need replacing.
TIK ubntPsuBatteryTimeRemaining	1.3.6.1.4.1.41112.1.5.3.2.1.10	TimeTicks	read-only	The battery run time remaining before battery exhaustion.
U32 ubntPsuBaysNumber	1.3.6.1.4.1.41112.1.5.3.1	Unsigned32	read-only	The number of PSU bays available on this system.
INT ubntPsuCharging	1.3.6.1.4.1.41112.1.5.3.2.1.7	INTEGER	read-only	Shows PSU charging state if it is supported.
ubntPsuEntry	1.3.6.1.4.1.41112.1.5.3.2.1		not-accessible	An entry in the ubntPsuTable.
I32 ubntPsuIndex	1.3.6.1.4.1.41112.1.5.3.2.1.1	Integer32	read-only	A unique value for each PSU.
INT ubntPsuOperStatus	1.3.6.1.4.1.41112.1.5.3.2.1.4	INTEGER	read-only	PSU operational status.
INT ubntPsuStatus	1.3.6.1.4.1.41112.1.5.3.2.1.3	INTEGER	read-only	PSU Status.
ubntPsuTable	1.3.6.1.4.1.41112.1.5.3.2		not-accessible	A list of PSU entries. The number of entries is given by the value of ubntPsuBaysNumber.
I32 ubntPsuTemperature	1.3.6.1.4.1.41112.1.5.3.2.1.6	Integer32	read-only	PSU temperature in thousands of degrees Celsius.
INT ubntPsuType	1.3.6.1.4.1.41112.1.5.3.2.1.2	INTEGER	read-only	PSU Type.
I32 ubntPsuVoltage	1.3.6.1.4.1.41112.1.5.3.2.1.5	Integer32	read-only	PSU voltage in mV.
STR ubntSerialNumber	1.3.6.1.4.1.41112.1.5.1.2	DisplayString	read-only	Serial number.
I32 ubntThermIndex	1.3.6.1.4.1.41112.1.5.4.2.1.1	Integer32	read-only	A unique value for thermometer.
ubntThermometers	1.3.6.1.4.1.41112.1.5.4
U32 ubntThermometersCount	1.3.6.1.4.1.41112.1.5.4.1	Unsigned32	read-only	The number of installed thermometers on this system.
ubntThermsEntry	1.3.6.1.4.1.41112.1.5.4.2.1		not-accessible	An entry in the ubntThermsTable.
ubntThermsTable	1.3.6.1.4.1.41112.1.5.4.2		not-accessible	A list of thermometers entries. The number of entries is given by the value of ubntThermometersCount.
I32 ubntThermTemperature	1.3.6.1.4.1.41112.1.5.4.2.1.3	Integer32	read-only	Temperature in thousands of degrees Celsius.
INT ubntThermType	1.3.6.1.4.1.41112.1.5.4.2.1.2	INTEGER	read-only	Type of thermometer.
STR ubntVersion	1.3.6.1.4.1.41112.1.5.1.3	DisplayString	read-only	Firmware version.

RFC description

Product identification and power monitoring for Ubiquiti EdgeMax network devices.

Start monitoring Ubiquiti EdgeRouter, Ubiquiti EdgeSwitch (interface throughput/error counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBNT-EdgeMAX-MIB