All MIBs › TY3250I-MIB › ty3250T1TotalUASs
ty3250T1TotalUASs
Module: TY3250I-MIB
OID (symbolic): TY3250I-MIB::ty3250T1TotalUASs
OID (numeric): 1.3.6.1.4.1.466.4.16.1.5
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: The number of Unavailable Seconds encountered by a t1 interface in the previous 24 hour in- terval. A UAS is a one second interval during which the received signal is classified as 'unavailable due to excessive errors'. A signal is unavailable after receiving ten consective severely errored seconds and stays unavailable until ten seconds without a severely errored second occur.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.4.16.1.5 snmpwalk -v2c -c public <target> TY3250I-MIB::ty3250T1TotalUASs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.4.16.1.5.1 snmpget -v2c -c public <target> TY3250I-MIB::ty3250T1TotalUASs.1
Start monitoring TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY3250I-MIB::ty3250T1TotalUASs OID value, configure state conditions and alerts, and monitor any TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466.4 | ty3250 | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.16 | ty3250PerfT1TotalTable | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.16.1 | ty3250T1TotalEntry | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.16.1.5 | ty3250T1TotalUASs | TY3250I-MIB |