All MIBs › TY3250I-MIB › ty3250CfgT1Timing
ty3250CfgT1Timing
Module: TY3250I-MIB
OID (symbolic): TY3250I-MIB::ty3250CfgT1Timing
OID (numeric): 1.3.6.1.4.1.466.4.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: T1 network interface timing source. There must be only one source on a T1 line. Node should typically be network (2) timed on a point-to-network application. Line Driver and point-to-point applications typically need one node as internal (1), one as network (2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.4.3.6 snmpwalk -v2c -c public <target> TY3250I-MIB::ty3250CfgT1Timing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.4.3.6.1 snmpget -v2c -c public <target> TY3250I-MIB::ty3250CfgT1Timing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.4.3.6.1 i <value>
Start monitoring TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY3250I-MIB::ty3250CfgT1Timing OID value, configure state conditions and alerts, and monitor any TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466.4 | ty3250 | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.3 | ty3250CfgT1Table | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.3.6 | ty3250CfgT1Timing | TY3250I-MIB |