All MIBs › TY3250I-MIB › ty3250CfgT1LboSetting
ty3250CfgT1LboSetting
Module: TY3250I-MIB
OID (symbolic): TY3250I-MIB::ty3250CfgT1LboSetting
OID (numeric): 1.3.6.1.4.1.466.4.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: CSU Line Build Out. Consult service provider for proper setting; either 0dB (1), -7.5dB (2), or -15dB (3). Not applicable if T1Interface = dsx1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.4.3.5 snmpwalk -v2c -c public <target> TY3250I-MIB::ty3250CfgT1LboSetting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.4.3.5.1 snmpget -v2c -c public <target> TY3250I-MIB::ty3250CfgT1LboSetting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.4.3.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ty3250CfgT1LboSetting.1
Start monitoring TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY3250I-MIB::ty3250CfgT1LboSetting OID value, configure state conditions and alerts, and monitor any TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466.4 | ty3250 | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.3 | ty3250CfgT1Table | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.3.5 | ty3250CfgT1LboSetting | TY3250I-MIB |