All MIBs › TY3250I-MIB › ty3250CfgT1Density
ty3250CfgT1Density
Module: TY3250I-MIB
OID (symbolic): TY3250I-MIB::ty3250CfgT1Density
OID (numeric): 1.3.6.1.4.1.466.4.3.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: CSU 'ones density' monitor. Defines the maximum number of consecutive zeros that can be transmitted to the network. If density monitoring is enabled, the composite signal is guaranteed to meet the selected density threshhold at the expense of user data. No-density (4) should be used if B8ZS Line Encoding is chosen or if Channel Density is bit-7-stuff. This option is not applicable if DSX-1 mode is selected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.4.3.3 snmpwalk -v2c -c public <target> TY3250I-MIB::ty3250CfgT1Density
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.4.3.3.1 snmpget -v2c -c public <target> TY3250I-MIB::ty3250CfgT1Density.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.4.3.3.1 i <value>
Start monitoring TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY3250I-MIB::ty3250CfgT1Density OID value, configure state conditions and alerts, and monitor any TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466.4 | ty3250 | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.3 | ty3250CfgT1Table | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.3.3 | ty3250CfgT1Density | TY3250I-MIB |