All MIBs › TY3250I-MIB › ty3250CfgDteLineRate
ty3250CfgDteLineRate
Module: TY3250I-MIB
OID (symbolic): TY3250I-MIB::ty3250CfgDteLineRate
OID (numeric): 1.3.6.1.4.1.466.4.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Serial Data Rate in bits-per-second, must be multiple of 8000bps. For example enter 768000 for 768Kb/s. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K for clear-channel (n is an integer 1-24 inclusive).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.4.4.1 snmpwalk -v2c -c public <target> TY3250I-MIB::ty3250CfgDteLineRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.4.4.1.1 snmpget -v2c -c public <target> TY3250I-MIB::ty3250CfgDteLineRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.4.4.1.1 i <value>
Start monitoring TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TY3250I-MIB::ty3250CfgDteLineRate OID value, configure state conditions and alerts, and monitor any TY3250I series T1/DTE multiplexer or channel bank (firmware revision/T1 line-config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.466 | tylink | TY1250I-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466.4 | ty3250 | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.4 | ty3250CfgDteTable | TY3250I-MIB |
| 1.3.6.1.4.1.466.4.4.1 | ty3250CfgDteLineRate | TY3250I-MIB |