TUNNEL-MIB :: tunnelIfLocalInetAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTUNNEL-MIBtunnelIfLocalInetAddress

tunnelIfLocalInetAddress

Module: TUNNEL-MIB

OID (symbolic): TUNNEL-MIB::tunnelIfLocalInetAddress

OID (numeric): 1.3.6.1.2.1.10.131.1.1.1.1.9

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is

0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by tunnelIfAddressType.

What is tunnelIfLocalInetAddress?

This read-write value sets the local endpoint address of the tunnel, used as the source address in the outer IP header of encapsulated packets; if unknown, it reads as 0.0.0.0 for IPv4 or :: for IPv6, and its type is given by tunnelIfAddressType. Admins configure it to specify which local IP address this device uses as the tunnel's source when encapsulating outbound traffic. For example, on a multi-homed router, setting this to a specific local address ensures the tunnel consistently sources its outer-header traffic from that address rather than an arbitrary interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.131.1.1.1.1.9
snmpwalk -v2c -c public <target> TUNNEL-MIB::tunnelIfLocalInetAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.131.1.1.1.1.9.1
snmpget -v2c -c public <target> TUNNEL-MIB::tunnelIfLocalInetAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.131.1.1.1.1.9.1 s <value>

Start monitoring vendor-neutral, standards-based MIB, router or VPN gateway supporting IP tunneling (GRE/IP-in-IP/L2TP/PPTP admin/oper status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TUNNEL-MIB::tunnelIfLocalInetAddress OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, router or VPN gateway supporting IP tunneling (GRE/IP-in-IP/L2TP/PPTP admin/oper status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.131tunnelMIBTUNNEL-MIB
1.3.6.1.2.1.10.131.1tunnelMIBObjectsTUNNEL-MIB
1.3.6.1.2.1.10.131.1.1tunnelTUNNEL-MIB
1.3.6.1.2.1.10.131.1.1.1tunnelIfTableTUNNEL-MIB
1.3.6.1.2.1.10.131.1.1.1.1tunnelIfEntryTUNNEL-MIB
1.3.6.1.2.1.10.131.1.1.1.1.9tunnelIfLocalInetAddressTUNNEL-MIB