All MIBs › TRIPPUPS1-MIB › upsAutoRestart

upsAutoRestart

OID (symbolic): TRIPPUPS1-MIB::upsAutoRestart

OID (numeric): 1.3.6.1.4.1.850.1.1.9.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this object to 'on' will cause the UPS system to restart after a shutdown if/when utility power is present.

What is upsAutoRestart?

Controls whether the UPS automatically restarts its output once utility power returns after a shutdown; setting it to on means connected equipment powers back up unattended when the outage ends.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.1.1.9.5
snmpwalk -v2c -c public <target> TRIPPUPS1-MIB::upsAutoRestart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.850.1.1.9.5.1
snmpget -v2c -c public <target> TRIPPUPS1-MIB::upsAutoRestart.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.850.1.1.9.5.1 i <value>

Start monitoring Tripp Lite uninterruptible power supply (UPS) units (battery temperature/input-voltage/output-load status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPUPS1-MIB::upsAutoRestart OID value, configure state conditions and alerts, and monitor any Tripp Lite uninterruptible power supply (UPS) units (battery temperature/input-voltage/output-load status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.850	tripplite	TRIPPLITE
1.3.6.1.4.1.850.1	trippUPS	TRIPPLITE-MIB
1.3.6.1.4.1.850.1.1	trippUpsReceptacles	TRIPPLITE-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.850.1.1.9	upsControl	TRIPPUPS1-MIB
1.3.6.1.4.1.850.1.1.9.5	upsAutoRestart	TRIPPUPS1-MIB

TRIPPUPS1-MIB :: upsAutoRestart

upsAutoRestart

Module

This MIB depends on