All MIBs › TRIPPLITE-PRODUCTS › tlpUpsConfigEconomicMode
tlpUpsConfigEconomicMode
Module: TRIPPLITE-PRODUCTS
OID (symbolic): TRIPPLITE-PRODUCTS::tlpUpsConfigEconomicMode
OID (numeric): 1.3.6.1.4.1.850.1.1.3.1.5.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The configurable economic mode options for the ups. The online(0) mode is the default configuration of most upss, which is synonymous as having the economic mode disabled. The economy(1) mode is the typical configuration to run in economy mode, which is synonymous as having the economic mode enabled. Constant50Hz(2) is a power strategy, which fixes the output frequency at 50Hz. Constant60Hz(3) is a power stragegy, which fixes the output frequency at 60Hz. ConstantAuto(4) regulates the output frequency at nominal input frequency. AutoAdaptive(5) mode will cause the ups to automatically switch between online(0), maximum quality, and economy(1), maximum efficiency, to improve efficiency during stable utility periods and improve output regulation during unstable utility periods. Not all values are supported by all upss. Most upss, if supportive of economic mode, only supports online(0) and economy(1). If the ups does not support economic mode, then this value will always return ERROR_NO_SUCH_NAME.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.1.1.3.1.5.1.1.15 snmpwalk -v2c -c public <target> TRIPPLITE-PRODUCTS::tlpUpsConfigEconomicMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.850.1.1.3.1.5.1.1.15.1 snmpget -v2c -c public <target> TRIPPLITE-PRODUCTS::tlpUpsConfigEconomicMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.850.1.1.3.1.5.1.1.15.1 i <value>
Start monitoring Tripp Lite PowerAlert-managed devices, UPS and related equipment (device inventory/firmware-identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-PRODUCTS::tlpUpsConfigEconomicMode OID value, configure state conditions and alerts, and monitor any Tripp Lite PowerAlert-managed devices, UPS and related equipment (device inventory/firmware-identity status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.850 | tripplite | TRIPPLITE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.850.1 | tlpProducts | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1 | tlpHardware | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1.3 | tlpDeviceTypes | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1.3.1 | tlpUps | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1.3.1.5 | tlpUpsConfig | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1.3.1.5.1 | tlpUpsConfigTable | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1.3.1.5.1.1 | tlpUpsConfigEntry | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.1.3.1.5.1.1.15 | tlpUpsConfigEconomicMode | TRIPPLITE-PRODUCTS |