All MIBs › TRIPPLITE-PRODUCTS › tlpAlarmTableRef
tlpAlarmTableRef
Module: TRIPPLITE-PRODUCTS
OID (symbolic): TRIPPLITE-PRODUCTS::tlpAlarmTableRef
OID (numeric): 1.3.6.1.4.1.850.1.3.2.1.4
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-only
Description: This value references the OID of a table object applicable to the alarm condition. This, in conjunction with the table row as defined by tlpAlarmTableRowRef, specifies the object/row within this table to which the alarm condition applies.
Example 1 -- The following sample values will be returned for a UPS on battery: tlpAlarmId 28 tlpAlarmDescr tlpUpsAlarmOnBattery tlpAlarmTime 12345678 tlpAlarmTableRef tlpDeviceTable tlpAlarmTableRowRef tlpDeviceIndex.2 tlpAlarmDetail On Battery tlpAlarmType warning tlpAlarmState active tlpAlarmAcknowledged notAcknowledged
In the above example, tlpAlarmTableRef references the device table and tlpAlarmTableRowRef references the 2nd managed device in that table.
Example 2 -- The following sample values will be returned for a PDU with a load turned off: tlpAlarmId 46 tlpAlarmDescr tlpPduAlarmLoadOff tlpAlarmTime 12345678 tlpAlarmTableRef tlpPduOutletTable tlpAlarmTableRowRef tlpOutletIndex.1.4 tlpAlarmDetail Load Off tlpAlarmType warning tlpAlarmState active tlpAlarmAcknowledged acknowledged
In the above example, tlpAlarmTableRef references the pdu outlet table and tlpAlarmTableRowRef references the 4th outlet on the 1st managed device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.1.3.2.1.4 snmpwalk -v2c -c public <target> TRIPPLITE-PRODUCTS::tlpAlarmTableRef
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.850.1.3.2.1.4.1 snmpget -v2c -c public <target> TRIPPLITE-PRODUCTS::tlpAlarmTableRef.1
Start monitoring Tripp Lite PowerAlert-managed devices, UPS and related equipment (device inventory/firmware-identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-PRODUCTS::tlpAlarmTableRef OID value, configure state conditions and alerts, and monitor any Tripp Lite PowerAlert-managed devices, UPS and related equipment (device inventory/firmware-identity status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.850 | tripplite | TRIPPLITE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.850.1 | tlpProducts | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.3 | tlpAlarms | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.3.2 | tlpAlarmTable | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.3.2.1 | tlpAlarmEntry | TRIPPLITE-PRODUCTS |
| 1.3.6.1.4.1.850.1.3.2.1.4 | tlpAlarmTableRef | TRIPPLITE-PRODUCTS |