TPLINK-AAA-MIB

All MIBs › TPLINK-AAA-MIB

Organization: TPLINK

Last Updated: 2015-06-11

Category: Access Control and Authentication

Description: Manages TP-Link switch AAA authentication, authorization, and accounting server configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPLINK-AAA-MIB?

This is a TP-Link private MIB for configuring AAA (Authentication, Authorization, and Accounting) services on TP-Link managed switches, covering server definitions used for centralized login/authentication (e.g., RADIUS/TACACS+-style servers). No specific object names were available in the sampled data, but per its scope it would expose server address, port, key, and status/priority configuration objects for the switch's AAA client function. It supports monitoring of the software security-configuration status, specifically whether configured authentication servers are reachable and correctly prioritized, which is important for diagnosing why administrative logins might be failing or falling back to local authentication. No explicit standards dependency is evident from the available data, though it conceptually parallels standard RADIUS/TACACS+ client configuration. It is typically deployed on TP-Link managed switches in enterprise networks using centralized AAA infrastructure for device administration. Engineers can download the TPLINK-AAA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPLINK-AAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TP-Link managed Ethernet switches

Monitoring Examples

No specific object names were included in the available sample data, so a concrete OID-level example cannot be honestly given; the module's scope implies a table of configured AAA server entries with reachability/status fields that an admin would poll to confirm a RADIUS or TACACS+ server is responding. Direct inspection of the raw MIB source would be required to identify the actual table and object names for a precise monitoring scenario.

What Can Be Monitored

AAA server configuration/reachability (exact objects not confirmed)

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From TPLINK-MIB

tplinkMgmt

OBJECT-IDENTITY

From TPLINK-TC-MIB

TPRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
tplinkAaaMIB	1.3.6.1.4.1.11863.6.82			Private MIB for aaa configuration.
aaaGlobalConfig	1.3.6.1.4.1.11863.6.82.1
INT swAaaGlobalEnable	1.3.6.1.4.1.11863.6.82.1.1	INTEGER	read-write	0. disable 1. enable Enable/Disable the AAA function.
aaaApplicationList	1.3.6.1.4.1.11863.6.82.1.2
aaaApplicationListTable	1.3.6.1.4.1.11863.6.82.1.2.1		not-accessible	Display the authentication method list the module use.
aaaApplicationListEntry	1.3.6.1.4.1.11863.6.82.1.2.1.1		not-accessible	An entry contains of the information of methodlist the module use.
INT moduleId	1.3.6.1.4.1.11863.6.82.1.2.1.1.1	INTEGER	read-only	Display the id of module.
OCT moduleName	1.3.6.1.4.1.11863.6.82.1.2.1.1.2	OCTET STRING	read-only	Display the name of module.
OCT loginList	1.3.6.1.4.1.11863.6.82.1.2.1.1.3	OCTET STRING	read-write	Display the login method list that the module use.
OCT enableList	1.3.6.1.4.1.11863.6.82.1.2.1.1.4	OCTET STRING	read-write	Display the enable method list that the module use.
aaaAuthenticationListConfig	1.3.6.1.4.1.11863.6.82.2
authenticationLoginMethodListTable	1.3.6.1.4.1.11863.6.82.2.1		not-accessible	Display the authentication login method list.
authenticationLoginMethodListEntry	1.3.6.1.4.1.11863.6.82.2.1.1		not-accessible	An entry contains of the information of method list.
OCT authenLoginListName	1.3.6.1.4.1.11863.6.82.2.1.1.1	OCTET STRING	read-create	The name of method list.
OCT authenLoginPri1	1.3.6.1.4.1.11863.6.82.2.1.1.2	OCTET STRING	read-write	The priority 1 method.
OCT authenLoginPri2	1.3.6.1.4.1.11863.6.82.2.1.1.3	OCTET STRING	read-write	The priority 2 method.
OCT authenLoginPri3	1.3.6.1.4.1.11863.6.82.2.1.1.4	OCTET STRING	read-write	The priority 3 method.
OCT authenLoginPri4	1.3.6.1.4.1.11863.6.82.2.1.1.5	OCTET STRING	read-write	The priority 4 method.
TPR authenLoginStatus	1.3.6.1.4.1.11863.6.82.2.1.1.6	TPRowStatus	read-create	the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
authenticationEnableMethodListTable	1.3.6.1.4.1.11863.6.82.2.2		not-accessible	Display the authentication enable method list..
authenticationEnableMethodListEntry	1.3.6.1.4.1.11863.6.82.2.2.1		not-accessible	An entry contains of the information of method list.
OCT authenEnableListName	1.3.6.1.4.1.11863.6.82.2.2.1.1	OCTET STRING	read-create	The name of method list.
OCT authenEnablePri1	1.3.6.1.4.1.11863.6.82.2.2.1.2	OCTET STRING	read-write	The priority 1 method.
OCT authenEnablePri2	1.3.6.1.4.1.11863.6.82.2.2.1.3	OCTET STRING	read-write	The priority 2 method.
OCT authenEnablePri3	1.3.6.1.4.1.11863.6.82.2.2.1.4	OCTET STRING	read-write	The priority 3 method.
OCT authenEnablePri4	1.3.6.1.4.1.11863.6.82.2.2.1.5	OCTET STRING	read-write	The priority 4 method.
TPR authenEnableStatus	1.3.6.1.4.1.11863.6.82.2.2.1.6	TPRowStatus	read-create	the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
aaaDot1xListConfig	1.3.6.1.4.1.11863.6.82.3
authenticationDot1xMethodListTable	1.3.6.1.4.1.11863.6.82.3.1		not-accessible	Display the authentication dot1x method list.
authenticationDot1xMethodListEntry	1.3.6.1.4.1.11863.6.82.3.1.1		not-accessible	An entry contains of the information of method list.
OCT authenDot1xListName	1.3.6.1.4.1.11863.6.82.3.1.1.1	OCTET STRING	read-only	The name of method list.
OCT authenDot1xPri1	1.3.6.1.4.1.11863.6.82.3.1.1.2	OCTET STRING	read-write	The priority 1 method.
TPR authenDot1xStatus	1.3.6.1.4.1.11863.6.82.3.1.1.3	TPRowStatus	read-only	the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
accountingDot1xMethodListTable	1.3.6.1.4.1.11863.6.82.3.2		not-accessible	Display the accounting dot1x method list.
accountingDot1xMethodListEntry	1.3.6.1.4.1.11863.6.82.3.2.1		not-accessible	An entry contains of the information of method list.
OCT acctDot1xListName	1.3.6.1.4.1.11863.6.82.3.2.1.1	OCTET STRING	read-only	The name of method list.
OCT acctDot1xPri1	1.3.6.1.4.1.11863.6.82.3.2.1.2	OCTET STRING	read-write	The priority 1 method.
TPR acctDot1xStatus	1.3.6.1.4.1.11863.6.82.3.2.1.3	TPRowStatus	read-only	the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
radiusDeamonTable	1.3.6.1.4.1.11863.6.82.4		not-accessible	RADIUS DEAMON is a server used to authenticate the user,which is getting access to the NAS(Network Access Server).
radiusDeamonEntry	1.3.6.1.4.1.11863.6.82.4.1		not-accessible	An entry contains of the information of a radius deamon.
IP radiusDeamonServerIp	1.3.6.1.4.1.11863.6.82.4.1.1	IpAddress	read-create	Enter the IP address of the RADIUS server.
INT radiusDeamonTimeout	1.3.6.1.4.1.11863.6.82.4.1.2	INTEGER	read-create	Enter the number of seconds the switch waits for a reply (1-9).
INT radiusDeamonRetransimit	1.3.6.1.4.1.11863.6.82.4.1.3	INTEGER	read-create	Enter the number of times the switch will resend an authentication request to the RADIUS server (1-3).
OCT radiusDeamonKey	1.3.6.1.4.1.11863.6.82.4.1.4	OCTET STRING	read-create	Enter the encryption key used to authenticate logon access.
INT radiusDeamonAuthPort	1.3.6.1.4.1.11863.6.82.4.1.5	INTEGER	read-create	Enter the radius server port used for sending authentication packets (1-65535).
INT radiusDeamonAcctPort	1.3.6.1.4.1.11863.6.82.4.1.6	INTEGER	read-create	Enter the radius server port used for sending authentication packets (1-65535).
TPR radiusDeamonStatus	1.3.6.1.4.1.11863.6.82.4.1.7	TPRowStatus	read-create	the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
tacacsDeamonTable	1.3.6.1.4.1.11863.6.82.5		not-accessible	TACACS(Terminal Access Controller Access Control System) DEAMON is a server used to authenticate the user,which is getting access to the NAS(Network Access Server).
tacacsDeamonEntry	1.3.6.1.4.1.11863.6.82.5.1		not-accessible	An entry contains of the information of a tacacs deamon.
IP tacacsDeamonServerIp	1.3.6.1.4.1.11863.6.82.5.1.1	IpAddress	read-create	Enter the IP address of the TACACS+ server.
INT tacacsDeamonTimeout	1.3.6.1.4.1.11863.6.82.5.1.2	INTEGER	read-create	Enter the number of seconds the switch waits for a reply (1-10).
OCT tacacsDeamonKey	1.3.6.1.4.1.11863.6.82.5.1.3	OCTET STRING	read-create	Enter the encryption key used to authenticate logon access.
INT tacacsDeamonPort	1.3.6.1.4.1.11863.6.82.5.1.4	INTEGER	read-create	Enter the tacacs+ server port used for sending authentication packets (1-65535).
TPR tacacsDeamonStatus	1.3.6.1.4.1.11863.6.82.5.1.5	TPRowStatus	read-create	the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)

RFC description

TP-Link AAA (Authentication, Authorization, Accounting) MIB for user access control and authentication configuration.

Start monitoring TP-Link managed Ethernet switches (AAA server config/reachability status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPLINK-AAA-MIB

What Is TPLINK-AAA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description