TN-SAP-MIB :: tnSapTlsStpAutoEdge

MIB Reference — IPNetwork Monitor

All MIBsTN-SAP-MIBtnSapTlsStpAutoEdge

tnSapTlsStpAutoEdge

Module: TN-SAP-MIB

OID (symbolic): TN-SAP-MIB::tnSapTlsStpAutoEdge

OID (numeric): 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27

Node type: OBJECT-TYPE

Type: TmnxEnabledDisabled

Access: read-write

Description:

tnSapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.

What is tnSapTlsStpAutoEdge?

This object enables or disables automatic edge port detection according to the Rapid Spanning Tree Protocol (RSTP) standard on a Service Access Point. When enabled, the system automatically detects whether the SAP connects to end devices or switches, optimizing the spanning tree convergence behavior. Operators use this setting to improve network convergence times when edge ports are dynamically connected to non-switching devices.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27
snmpwalk -v2c -c public <target> TN-SAP-MIB::tnSapTlsStpAutoEdge

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27.1
snmpget -v2c -c public <target> TN-SAP-MIB::tnSapTlsStpAutoEdge.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.7483tropicTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6tnProductsTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1tnSRMIBTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1.2tnSRObjsTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1.2.4tnServObjsTN-SERV-MIB
1.3.6.1.4.1.7483.6.1.2.4.3tnSapObjsTN-SAP-MIB
1.3.6.1.4.1.7483.6.1.2.4.3.3tnSapTlsInfoTableTN-SAP-MIB
1.3.6.1.4.1.7483.6.1.2.4.3.3.1tnSapTlsInfoEntryTN-SAP-MIB
1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27tnSapTlsStpAutoEdgeTN-SAP-MIB