TN-SAP-MIB :: tnSapTlsShcvAction

MIB Reference — IPNetwork Monitor

All MIBsTN-SAP-MIBtnSapTlsShcvAction

tnSapTlsShcvAction

Module: TN-SAP-MIB

OID (symbolic): TN-SAP-MIB::tnSapTlsShcvAction

OID (numeric): 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

The value of the object tnSapTlsShcvAction indicates whether any action should be triggered when the connectivity check fails.

What is tnSapTlsShcvAction?

This OID specifies an IP address target where automated actions should be sent when a health check to a remote system fails, allowing the device to notify or redirect traffic elsewhere. Setting this enables automatic failover responses. A network architect would configure this to point to a backup server's IP so that if connectivity checks fail, traffic automatically reroutes without manual intervention.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53
snmpwalk -v2c -c public <target> TN-SAP-MIB::tnSapTlsShcvAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53.1
snmpget -v2c -c public <target> TN-SAP-MIB::tnSapTlsShcvAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.7483tropicTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6tnProductsTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1tnSRMIBTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1.2tnSRObjsTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1.2.4tnServObjsTN-SERV-MIB
1.3.6.1.4.1.7483.6.1.2.4.3tnSapObjsTN-SAP-MIB
1.3.6.1.4.1.7483.6.1.2.4.3.3tnSapTlsInfoTableTN-SAP-MIB
1.3.6.1.4.1.7483.6.1.2.4.3.3.1tnSapTlsInfoEntryTN-SAP-MIB
1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53tnSapTlsShcvActionTN-SAP-MIB