TN-DEV-SYS-IP2-MIB :: tnIp2Addr

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › TN-DEV-SYS-IP2-MIB › tnIp2Addr

tnIp2Addr

Module: TN-DEV-SYS-IP2-MIB

OID (symbolic): TN-DEV-SYS-IP2-MIB::tnIp2Addr

OID (numeric): 1.3.6.1.4.1.868.2.5.10.8.3.1.6

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-create

Description: The IPv4 address of the interface in dotted decimal notation. If DHCP is enabled, this field is not used. The field may also be left blank if IPv4 operation on the interface is not desired.

What is tnIp2Addr?

This read-create value sets the static IPv4 address for this interface in dotted-decimal notation, used only when DHCP is not enabled on the interface. An admin configures it on interfaces meant to have a fixed address, such as a management VLAN, while leaving it blank on interfaces that shouldn't run IPv4 at all. Setting tnIp2Addr to 10.0.0.1 gives that VLAN interface a permanent management address that survives even if DHCP service is later disabled.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.868transitionTRANSITION-SMI
1.3.6.1.4.1.868.2productsTRANSITION-SMI
1.3.6.1.4.1.868.2.5tnProductsTRANSITION-SMI
Numeric OIDNameModule
1.3.6.1.4.1.868.2.5.10tnDevSysIpMgmtMIBTN-DEV-SYS-IP2-MIB
1.3.6.1.4.1.868.2.5.10.8tnDevSysIp2mgmtTN-DEV-SYS-IP2-MIB
1.3.6.1.4.1.868.2.5.10.8.3tnIp2InterfaceTableTN-DEV-SYS-IP2-MIB
1.3.6.1.4.1.868.2.5.10.8.3.1tnIp2InterfaceEntryTN-DEV-SYS-IP2-MIB
1.3.6.1.4.1.868.2.5.10.8.3.1.6tnIp2AddrTN-DEV-SYS-IP2-MIB