All MIBs › TIMETRA-DOT3-OAM-MIB › tmnxDot3OamHoldTime
tmnxDot3OamHoldTime
Module: TIMETRA-DOT3-OAM-MIB
OID (symbolic): TIMETRA-DOT3-OAM-MIB::tmnxDot3OamHoldTime
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The value of tmnxDot3OamHoldTime specifies the number of seconds the efm-oam protocol should wait after dot3OamOperStatus transitions from 'operational (9)' to a non-operational state before going back to the 'operational (9)' state again. Note that a transition to the 'linkFault (2)' state does not cause tmnxDot3OamHoldTime to be used if dot3OamOperStatus was previously in the 'operational (9)' state.
What is tmnxDot3OamHoldTime?
This object specifies the number of seconds the 802.3ah OAM protocol waits after dot3OamOperStatus transitions from operational to a non-operational state before allowing it to return to operational again, though a transition to linkFault specifically does not use this hold time. Admins tune it to dampen flapping OAM sessions from rapidly toggling operational state. Setting tmnxDot3OamHoldTime to 30 would make the OAM session wait 30 seconds after most non-operational transitions before it's allowed to go operational again.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6 snmpwalk -v2c -c public <target> TIMETRA-DOT3-OAM-MIB::tmnxDot3OamHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6.1 snmpget -v2c -c public <target> TIMETRA-DOT3-OAM-MIB::tmnxDot3OamHoldTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6.1 i <value>
Start monitoring Alcatel-Lucent/Nokia SROS routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-DOT3-OAM-MIB::tmnxDot3OamHoldTime OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent/Nokia SROS routers from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.42 | tmnxDot3OamObjs | TIMETRA-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.42.1 | tmnxDot3OamEntryObjs | TIMETRA-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.42.1.1 | tmnxDot3OamTable | TIMETRA-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.42.1.1.1 | tmnxDot3OamEntry | TIMETRA-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6 | tmnxDot3OamHoldTime | TIMETRA-DOT3-OAM-MIB |