TIC-RMTI4-G9000-G2020-MIB :: upsConfigRatedInputLLVoltage

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TIC-RMTI4-G9000-G2020-MIB › upsConfigRatedInputLLVoltage

upsConfigRatedInputLLVoltage

Module: TIC-RMTI4-G9000-G2020-MIB

OID (symbolic): TIC-RMTI4-G9000-G2020-MIB::upsConfigRatedInputLLVoltage

OID (numeric): 1.3.6.1.4.1.186.1.19.2.5.1.7.5

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: The magnitude of the nominal input voltage. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2.

What is upsConfigRatedInputLLVoltage?

Sets and reports the UPS's nominal input line-to-line voltage in RMS volts. Because it's read-write, an admin can attempt to change it to match a different supply voltage, but the agent rejects unsupported values with an SNMP error.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.186.1.19.2.5.1.7.5
snmpwalk -v2c -c public <target> TIC-RMTI4-G9000-G2020-MIB::upsConfigRatedInputLLVoltage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.186.1.19.2.5.1.7.5.1
snmpget -v2c -c public <target> TIC-RMTI4-G9000-G2020-MIB::upsConfigRatedInputLLVoltage.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.186.1.19.2.5.1.7.5.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> upsConfigRatedInputLLVoltage.1

Start monitoring Toshiba UPS, uninterruptible power supply (firmware/AC input voltage status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIC-RMTI4-G9000-G2020-MIB::upsConfigRatedInputLLVoltage OID value, configure state conditions and alerts, and monitor any Toshiba UPS, uninterruptible power supply (firmware/AC input voltage status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.186toshibaTIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1equTIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1.19equUPSTIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1.19.2ticUPSTIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1.19.2.5rmti4TIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1.19.2.5.1upsG9000_G2020TIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1.19.2.5.1.7upsConfigTIC-RMTI4-G9000-G2020-MIB
1.3.6.1.4.1.186.1.19.2.5.1.7.5upsConfigRatedInputLLVoltageTIC-RMTI4-G9000-G2020-MIB