All MIBs › TIARA-NETWORKS-DSX-TE3-MIB › dsxT3E3IfStatusLineStatus
dsxT3E3IfStatusLineStatus
Module: TIARA-NETWORKS-DSX-TE3-MIB
OID (symbolic): TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfStatusLineStatus
OID (numeric): 1.3.6.1.4.1.3174.2.7.1.3.1.2.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Line Status of the T3/E3 interface. sendPattern - TRUE if the line transmiting bit pattern, sendTE3Code - sending T3/E3 code, sendResetCode - transmits Reset Code if it is TRUE, sendPayloadcode - transmits the payload code, sendLinecode - transmitts the line code, febe - Far End Block Error, pde - pulse Density code transmission, lorc - loss of recieve clock, rfebe - recieve far end block error, ris - recieve Idle signal, rexz - recieve exessive zeros, rcvTestCode - recieve test code, loopback - loopback status , rlos - recieve loss of signal, rlof - recieve loss of frame, tais - transmit alarm indication signal, rais - recieve alarm indication signal, trai - transmit remote alarm indication, rrai - recieve remote alarm indication,
What is dsxT3E3IfStatusLineStatus?
Bitmask of live line-level conditions on the T3/E3 interface - which signaling/code patterns it's currently transmitting (e.g. sendPattern, sendTE3Code, sendLineCode) and which alarm/error conditions it's currently receiving (e.g. rlos - loss of signal, rlof - loss of frame, rais/tais - alarm indication signal, rrai/trai - remote alarm indication); admins read this bitmask to get a live snapshot of exactly what's happening on the line without reading individual alarm objects one at a time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.1.3.1.2.1.1.1 snmpwalk -v2c -c public <target> TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfStatusLineStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.1.3.1.2.1.1.1.1 snmpget -v2c -c public <target> TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfStatusLineStatus.1
Start monitoring Tiara Networks WAN router with T3/E3 interface module (line config/MDL/alarm trap status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfStatusLineStatus OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router with T3/E3 interface module (line config/MDL/alarm trap status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7 | tiaraInterfaces | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7.1 | dsxMIB | TIARA-NETWORKS-DSX-TC-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3 | dsxT3E3IfGroup | TIARA-NETWORKS-DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.3.1 | dsxT3E3MIB | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2 | dsxT3E3IfStatusGroup | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2.1 | dsxT3E3IfStatusTable | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2.1.1 | dsxT3E3IfStatusEntry | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2.1.1.1 | dsxT3E3IfStatusLineStatus | TIARA-NETWORKS-DSX-TE3-MIB |