All MIBs › TIARA-NETWORKS-DSX-TE3-MIB › dsxT3E3IfAlarmStatusAlarmStatus
dsxT3E3IfAlarmStatusAlarmStatus
Module: TIARA-NETWORKS-DSX-TE3-MIB
OID (symbolic): TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfAlarmStatusAlarmStatus
OID (numeric): 1.3.6.1.4.1.3174.2.7.1.3.1.2.2.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: current status of all the T3/E3 interface alarms. RRAI - Recieve Remote Alarm Indication, TRAI - Transmit Remote Alarm Indication, TAIS - Transmit Alarm Indication Siganl, RLOF - Recieve Loss Of Frame, RLOS - Recieve Loss Of Sync, Loopback - Status of Loop back, rcvTestCode - Recieve Test Code, rblu - Recieve Blue Alarm, RIS - Recieve Idle Signal, REXZ - Recieve Excessive Zeros, RFBE - Recieve Frame Bit Error, RPE - Recieve Parity Error, RCPE - Recieve C-Parity Error, LORC - Loss Of Recive Clock (LORC), TPDE - transmit pulse density, RAIS - Recieve Alarm Indication Signal, TFEBE - Transmit Far End Block Alarm.
What is dsxT3E3IfAlarmStatusAlarmStatus?
Bitmask of every currently active alarm condition on this T3/E3 interface in one read - covering receive alarms like RLOS (loss of sync), RLOF (loss of frame), RAIS/TAIS (alarm indication signal), RRAI/TRAI (remote alarm indication), and error conditions like REXZ (excessive zeros) or RFBE (frame bit errors) - a quick way to see everything currently wrong with the line without polling each alarm individually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.1.3.1.2.2.1.1 snmpwalk -v2c -c public <target> TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfAlarmStatusAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.7.1.3.1.2.2.1.1.1 snmpget -v2c -c public <target> TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfAlarmStatusAlarmStatus.1
Start monitoring Tiara Networks WAN router with T3/E3 interface module (line config/MDL/alarm trap status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARA-NETWORKS-DSX-TE3-MIB::dsxT3E3IfAlarmStatusAlarmStatus OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router with T3/E3 interface module (line config/MDL/alarm trap status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7 | tiaraInterfaces | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2.7.1 | dsxMIB | TIARA-NETWORKS-DSX-TC-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3 | dsxT3E3IfGroup | TIARA-NETWORKS-DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.3.1 | dsxT3E3MIB | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2 | dsxT3E3IfStatusGroup | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2.2 | dsxT3E3IfAlarmStatusTable | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2.2.1 | dsxT3E3IfAlarmStatusEntry | TIARA-NETWORKS-DSX-TE3-MIB |
| 1.3.6.1.4.1.3174.2.7.1.3.1.2.2.1.1 | dsxT3E3IfAlarmStatusAlarmStatus | TIARA-NETWORKS-DSX-TE3-MIB |