TELECOM-MIB :: matConfStsIpvVoltLowLoss

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTELECOM-MIBmatConfStsIpvVoltLowLoss

matConfStsIpvVoltLowLoss

Module: TELECOM-MIB

OID (symbolic): TELECOM-MIB::matConfStsIpvVoltLowLoss

OID (numeric): 1.3.6.1.4.1.935.10.2.1.5.14

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: STS module Inverter IPV low Loss Volt, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 890-1050, 1150 930-1100, 1200 1000-1140, 2080 1760-1980, 2200 1760-2090, 2300 1850-2180, 2400 1930-2280

What is matConfStsIpvVoltLowLoss?

This configures the low-loss (under-voltage cutoff) threshold for the STS module's inverter (IPV) input, whose valid range depends on matConfInvSysOutputVolt per the DESCRIPTION's lookup table. An admin tuning how sensitive the STS is to an under-voltage inverter source would select a value within the allowed range for the current output voltage setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.14
snmpwalk -v2c -c public <target> TELECOM-MIB::matConfStsIpvVoltLowLoss

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.14.1
snmpget -v2c -c public <target> TELECOM-MIB::matConfStsIpvVoltLowLoss.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.2.1.5.14.1 i <value>

Start monitoring generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELECOM-MIB::matConfStsIpvVoltLowLoss OID value, configure state conditions and alerts, and monitor any generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935ppcTELECOM-MIB
1.3.6.1.4.1.935.10deviceTELECOM-MIB
1.3.6.1.4.1.935.10.2matAgentTELECOM-MIB
1.3.6.1.4.1.935.10.2.1matObjectsTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5matConfigTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5.14matConfStsIpvVoltLowLossTELECOM-MIB