TELECOM-MIB :: matConfStsAcVoltHighLoss

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTELECOM-MIBmatConfStsAcVoltHighLoss

matConfStsAcVoltHighLoss

Module: TELECOM-MIB

OID (symbolic): TELECOM-MIB::matConfStsAcVoltHighLoss

OID (numeric): 1.3.6.1.4.1.935.10.2.1.5.11

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: STS Module AC Voltage High Loss Volt, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 1170-1270, 1150 1220-1320, 1200 1270-1380, 2080 2200-2400, 2200 2330-2520, 2300 2440-2640, 2400 2540-2760

What is matConfStsAcVoltHighLoss?

This configures the AC voltage high-loss (over-voltage cutoff) threshold for the STS module, whose valid range depends on matConfInvSysOutputVolt per the DESCRIPTION's lookup table, matching the same range structure as matConfInvSysOutputVoltHighLoss. An admin tuning STS-side over-voltage protection would select a value within the allowed range for the currently configured system output voltage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.11
snmpwalk -v2c -c public <target> TELECOM-MIB::matConfStsAcVoltHighLoss

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.11.1
snmpget -v2c -c public <target> TELECOM-MIB::matConfStsAcVoltHighLoss.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.2.1.5.11.1 i <value>

Start monitoring generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELECOM-MIB::matConfStsAcVoltHighLoss OID value, configure state conditions and alerts, and monitor any generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935ppcTELECOM-MIB
1.3.6.1.4.1.935.10deviceTELECOM-MIB
1.3.6.1.4.1.935.10.2matAgentTELECOM-MIB
1.3.6.1.4.1.935.10.2.1matObjectsTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5matConfigTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5.11matConfStsAcVoltHighLossTELECOM-MIB