TELECOM-MIB :: matConfInvSysPowerLimit

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTELECOM-MIBmatConfInvSysPowerLimit

matConfInvSysPowerLimit

Module: TELECOM-MIB

OID (symbolic): TELECOM-MIB::matConfInvSysPowerLimit

OID (numeric): 1.3.6.1.4.1.935.10.2.1.5.6

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: Inverter System Power Limited level, format: xxx, range: 50 to 100, the unit is percent.

What is matConfInvSysPowerLimit?

This configures the inverter system's power-limiting level as a percentage from 50 to 100. An admin protecting an undersized power feed or battery bank from overload would lower this limit to cap the inverter system's maximum output below its full rated capacity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.6
snmpwalk -v2c -c public <target> TELECOM-MIB::matConfInvSysPowerLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.6.1
snmpget -v2c -c public <target> TELECOM-MIB::matConfInvSysPowerLimit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.2.1.5.6.1 i <value>

Start monitoring generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELECOM-MIB::matConfInvSysPowerLimit OID value, configure state conditions and alerts, and monitor any generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935ppcTELECOM-MIB
1.3.6.1.4.1.935.10deviceTELECOM-MIB
1.3.6.1.4.1.935.10.2matAgentTELECOM-MIB
1.3.6.1.4.1.935.10.2.1matObjectsTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5matConfigTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5.6matConfInvSysPowerLimitTELECOM-MIB