TELECOM-MIB :: matConfInvSysOutputVoltLowLoss

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTELECOM-MIBmatConfInvSysOutputVoltLowLoss

matConfInvSysOutputVoltLowLoss

Module: TELECOM-MIB

OID (symbolic): TELECOM-MIB::matConfInvSysOutputVoltLowLoss

OID (numeric): 1.3.6.1.4.1.935.10.2.1.5.4

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: Output Voltage Low Loss of inverter System, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 890-1050, 1150 930-1100, 1200 1000-1140, 2080 1760-1980, 2200 1760-2090, 2300 1850-2180, 2400 1930-2280

What is matConfInvSysOutputVoltLowLoss?

This configures the output low-loss (under-voltage cutoff) threshold for the inverter system, whose valid range depends on matConfInvSysOutputVolt per the DESCRIPTION's lookup table (e.g. 890-1050 for a 110.0V setting), with the least significant digit required to be zero. An admin adjusting under-voltage sensitivity would pick a value from the range matching the currently configured output voltage setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.4
snmpwalk -v2c -c public <target> TELECOM-MIB::matConfInvSysOutputVoltLowLoss

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.4.1
snmpget -v2c -c public <target> TELECOM-MIB::matConfInvSysOutputVoltLowLoss.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.2.1.5.4.1 i <value>

Start monitoring generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELECOM-MIB::matConfInvSysOutputVoltLowLoss OID value, configure state conditions and alerts, and monitor any generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935ppcTELECOM-MIB
1.3.6.1.4.1.935.10deviceTELECOM-MIB
1.3.6.1.4.1.935.10.2matAgentTELECOM-MIB
1.3.6.1.4.1.935.10.2.1matObjectsTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5matConfigTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5.4matConfInvSysOutputVoltLowLossTELECOM-MIB