All MIBs › TELECOM-MIB › matConfInvSysOutputVoltHighLoss
matConfInvSysOutputVoltHighLoss
Module: TELECOM-MIB
OID (symbolic): TELECOM-MIB::matConfInvSysOutputVoltHighLoss
OID (numeric): 1.3.6.1.4.1.935.10.2.1.5.3
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-write
Description: Output voltage high loss of Inverter System, the unit is 0.1 Volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 1170-1270, 1150 1220-1320, 1200 1270-1380, 2080 2200-2400, 2200 2330-2520, 2300 2440-2640, 2400 2540-2760
What is matConfInvSysOutputVoltHighLoss?
This configures the output high-loss (over-voltage cutoff) threshold for the inverter system, whose valid range depends on matConfInvSysOutputVolt per the DESCRIPTION's lookup table (e.g. 2200-2400 for a 220.0V setting), with the least significant digit required to be zero. An admin tightening over-voltage protection would set this within the allowed range for the currently configured output voltage rather than an arbitrary value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.3 snmpwalk -v2c -c public <target> TELECOM-MIB::matConfInvSysOutputVoltHighLoss
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.3.1 snmpget -v2c -c public <target> TELECOM-MIB::matConfInvSysOutputVoltHighLoss.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.2.1.5.3.1 i <value>
Start monitoring generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELECOM-MIB::matConfInvSysOutputVoltHighLoss OID value, configure state conditions and alerts, and monitor any generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935 | ppc | TELECOM-MIB |
| 1.3.6.1.4.1.935.10 | device | TELECOM-MIB |
| 1.3.6.1.4.1.935.10.2 | matAgent | TELECOM-MIB |
| 1.3.6.1.4.1.935.10.2.1 | matObjects | TELECOM-MIB |
| 1.3.6.1.4.1.935.10.2.1.5 | matConfig | TELECOM-MIB |
| 1.3.6.1.4.1.935.10.2.1.5.3 | matConfInvSysOutputVoltHighLoss | TELECOM-MIB |