TELECOM-MIB :: matConfInvSysLineVoltLowLoss

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTELECOM-MIBmatConfInvSysLineVoltLowLoss

matConfInvSysLineVoltLowLoss

Module: TELECOM-MIB

OID (symbolic): TELECOM-MIB::matConfInvSysLineVoltLowLoss

OID (numeric): 1.3.6.1.4.1.935.10.2.1.5.8

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: Low loss for line voltage of 3.5k inverter module, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 2080 1850-1980, 2200 1850-2100, 2300 1850-2200, 2400 1850-2300

What is matConfInvSysLineVoltLowLoss?

This configures the low-loss (under-voltage cutoff) threshold for the mains line voltage feeding a 3.5kVA inverter module, whose valid range depends on matConfInvSysOutputVolt per the DESCRIPTION's table. An admin tuning mains-side under-voltage sensitivity would select a value within the allowed range for the current output voltage setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.8
snmpwalk -v2c -c public <target> TELECOM-MIB::matConfInvSysLineVoltLowLoss

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.10.2.1.5.8.1
snmpget -v2c -c public <target> TELECOM-MIB::matConfInvSysLineVoltLowLoss.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.935.10.2.1.5.8.1 i <value>

Start monitoring generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELECOM-MIB::matConfInvSysLineVoltLowLoss OID value, configure state conditions and alerts, and monitor any generic telecom access/transport equipment, vendor telecom chassis with pluggable modules (chassis temperature/warning/module-inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935ppcTELECOM-MIB
1.3.6.1.4.1.935.10deviceTELECOM-MIB
1.3.6.1.4.1.935.10.2matAgentTELECOM-MIB
1.3.6.1.4.1.935.10.2.1matObjectsTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5matConfigTELECOM-MIB
1.3.6.1.4.1.935.10.2.1.5.8matConfInvSysLineVoltLowLossTELECOM-MIB