TELDAT-MON-INTERF-SSL-MIB :: telProdNpMonIfcSSLFramesClear

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-INTERF-SSL-MIB › telProdNpMonIfcSSLFramesClear

telProdNpMonIfcSSLFramesClear

Module: TELDAT-MON-INTERF-SSL-MIB

OID (symbolic): TELDAT-MON-INTERF-SSL-MIB::telProdNpMonIfcSSLFramesClear

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.2.2.15.3.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable when is read shows the output from the last table delete attempt: the value is 2 if the deletion was performed succesfully, 3 if an error ocurred and 4 for an undefined result, that means that nobody has tried to delete the table yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a table deletion: frame counters are set to 0.

What is telProdNpMonIfcSSLFramesClear?

On read, reports the result of the last attempt to clear this port's frame counters: ok(2) if it succeeded, error(3) if it failed, or undefined(4) if no clear has been attempted yet. Setting it to delete(1) resets all the frame error counters in this row to zero, giving admins a clean baseline for troubleshooting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.2.2.15.3.1.2
snmpwalk -v2c -c public <target> TELDAT-MON-INTERF-SSL-MIB::telProdNpMonIfcSSLFramesClear

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.2.2.15.3.1.2.1
snmpget -v2c -c public <target> TELDAT-MON-INTERF-SSL-MIB::telProdNpMonIfcSSLFramesClear.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2007.4.1.2.2.2.15.3.1.2.1 i <value>

Start monitoring Teldat router with SSL/TLS VPN interfaces (tunnel/cipher/session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-INTERF-SSL-MIB::telProdNpMonIfcSSLFramesClear OID value, configure state conditions and alerts, and monitor any Teldat router with SSL/TLS VPN interfaces (tunnel/cipher/session status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.2telProdNpMonInterfaceTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.2.2telProdNpMonInterfRouterTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.2.2.15telProdNpMonInterfSSLTELDAT-MON-INTERF-SSL-MIB
1.3.6.1.4.1.2007.4.1.2.2.2.15.3telProdNpMonIfcSSLFramesTableTELDAT-MON-INTERF-SSL-MIB
1.3.6.1.4.1.2007.4.1.2.2.2.15.3.1telProdNpMonIfcSSLFramesEntryTELDAT-MON-INTERF-SSL-MIB
1.3.6.1.4.1.2007.4.1.2.2.2.15.3.1.2telProdNpMonIfcSSLFramesClearTELDAT-MON-INTERF-SSL-MIB