TELDAT-CFG-PROTOCOL-IP-MIB :: telProdNpIPDirStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › TELDAT-CFG-PROTOCOL-IP-MIB › telProdNpIPDirStatus

telProdNpIPDirStatus

Module: TELDAT-CFG-PROTOCOL-IP-MIB

OID (symbolic): TELDAT-CFG-PROTOCOL-IP-MIB::telProdNpIPDirStatus

OID (numeric): 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Table control variable. Set to 1 does nothing. Set to 2 adds a new row (IP address) in the table with the default values, and returns 2. If it already existed, it modifies IP address as it is described in the following variable(telProdNpIPDirIP). The new row must be added immediately after the last index. Set to 3 deletes all the table fields corresponding to the index, and returns 3. Get returns 1 if the address exists.

What is telProdNpIPDirStatus?

Table control variable for adding/removing an IP-address table row: writing valid(1) does nothing, add(2) creates a new row with default values (or modifies the existing address if the row already exists) and must be added right after the last index, and delete(3) removes the row; reading it back returns valid(1) if the address exists.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.3
snmpwalk -v2c -c public <target> TELDAT-CFG-PROTOCOL-IP-MIB::telProdNpIPDirStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.3.1
snmpget -v2c -c public <target> TELDAT-CFG-PROTOCOL-IP-MIB::telProdNpIPDirStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.3.1 i <value>

Start monitoring Teldat router/branch-office CPE router (IP addressing/routing config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-CFG-PROTOCOL-IP-MIB::telProdNpIPDirStatus OID value, configure state conditions and alerts, and monitor any Teldat router/branch-office CPE router (IP addressing/routing config status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.1telProductsNpConfigTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.1.5telProdNpConfProtocolTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.1.5.1telProdNpConfProtIPTELDAT-CFG-PROTOCOL-IP-MIB
1.3.6.1.4.1.2007.4.1.1.5.1.2telProdNpIPDirTableTELDAT-CFG-PROTOCOL-IP-MIB
1.3.6.1.4.1.2007.4.1.1.5.1.2.1telProdNpIPDirEntryTELDAT-CFG-PROTOCOL-IP-MIB
1.3.6.1.4.1.2007.4.1.1.5.1.2.1.3telProdNpIPDirStatusTELDAT-CFG-PROTOCOL-IP-MIB