T11-FC-SP-ZONING-MIB :: t11FcSpZsServerCapabilityObject

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › T11-FC-SP-ZONING-MIB › t11FcSpZsServerCapabilityObject

t11FcSpZsServerCapabilityObject

Module: T11-FC-SP-ZONING-MIB

OID (symbolic): T11-FC-SP-ZONING-MIB::t11FcSpZsServerCapabilityObject

OID (numeric): 1.3.6.1.2.1.177.1.1.1.1.1

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: Capabilities of the Zone Server for the particular Fabric on the particular Switch, with respect to FC-SP Zoning:

fcSpZoning -- set to 1 to indicate the Switch is capable of supporting FC-SP Zoning.

What is t11FcSpZsServerCapabilityObject?

This bitmask reports the FC-SP zoning capabilities of the Zone Server for a particular Fabric on a particular Switch, currently defining a single bit, fcSpZoning, that is set to 1 if the switch supports FC-SP Zoning. An admin queries this before attempting to enable FC-SP Zoning, via t11FcSpZsServerEnabled, to confirm the switch's hardware and firmware actually support the security-enhanced zoning mode. A returned value with the fcSpZoning bit clear tells the admin that switch cannot run FC-SP Zoning and must be upgraded before enabling it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.177.1.1.1.1.1
snmpwalk -v2c -c public <target> T11-FC-SP-ZONING-MIB::t11FcSpZsServerCapabilityObject

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.177.1.1.1.1.1.1
snmpget -v2c -c public <target> T11-FC-SP-ZONING-MIB::t11FcSpZsServerCapabilityObject.1

Start monitoring Fibre Channel switches and directors with FC-SP zoning support (secure zoning capability/hash-integrity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-FC-SP-ZONING-MIB::t11FcSpZsServerCapabilityObject OID value, configure state conditions and alerts, and monitor any Fibre Channel switches and directors with FC-SP zoning support (secure zoning capability/hash-integrity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.177t11FcSpZoningMIBT11-FC-SP-ZONING-MIB
1.3.6.1.2.1.177.1t11FcSpZsMIBObjectsT11-FC-SP-ZONING-MIB
1.3.6.1.2.1.177.1.1t11FcSpZsConfigurationT11-FC-SP-ZONING-MIB
1.3.6.1.2.1.177.1.1.1t11FcSpZsServerTableT11-FC-SP-ZONING-MIB
1.3.6.1.2.1.177.1.1.1.1t11FcSpZsServerEntryT11-FC-SP-ZONING-MIB
1.3.6.1.2.1.177.1.1.1.1.1t11FcSpZsServerCapabilityObjectT11-FC-SP-ZONING-MIB