All MIBs › SYNOPTICS-ETHERNET-MIB › s3EnetThreshType
s3EnetThreshType
Module: SYNOPTICS-ETHERNET-MIB
OID (symbolic): SYNOPTICS-ETHERNET-MIB::s3EnetThreshType
OID (numeric): 1.3.6.1.4.1.45.1.3.2.8.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines which type of threshold applies to
this entry. The possible values that can be
read and written are listed below.
Applicable to ALL Thresholds
==============================================
goodBytes(2).........Count of good bytes
goodPkts(3)..........Count of good packets
badPkts(4)...........Count of bad packets
crcPkts(5)...........Count of packets with CRC
errors
misaligned(6)........Count of misaligned packets
runtPkts(7)..........Count of runt packets
fragPkts(8)..........Count of fragmented packets
tooLong(9)...........Count of too long packets
collision(10)........Count of collisions
lateColls(11)........Count of late collisions
multicast(13)........Count of multicast packets
broadcast(14)........Count of broadcast packets
shortEvents(15)......Count of short events
dataRateMismatches(17)....
Count of data rate
mismatches
networkErrors(18).........
Count of short events,
late collisions, and
data rate mismatches
badToGoodPktRatio(19).....
Ratio of bad packets to
good packets, where
bad packets is the sum
of packets with alignment
errors, packets with FCS
errors, runt packets, and
packets that are too long
netErrToGoodPktRatio(20)...
Ratio of network error
packets to good packets,
where network error
packets is the sum of
short event packets,
packets with late
collisions, and data
rate mismatch packets
colltoGoodPktRatio(21).....
Ratio of collision packets
to good packets
Applicable ONLY to Port Thresholds
==============================================
linkStatus(12).......Status of the link
srcAddrChanges(16)...Count of source address
changes
Applicable ONLY to Concentrator Thresholds
==============================================
collBackOffErr(22)...Count of collision backoff
errors
Note: 1.) The value other(1) can only be
read and it indicates the entry
has an invalid or unknown threshold
type.What is s3EnetThreshType?
The statistic the threshold watches: counts such as goodBytes(2), badPkts(4), crcPkts(5), runtPkts(7), collision(10), lateColls(11), multicast(13), broadcast(14), shortEvents(15), ratios such as badToGoodPktRatio(19), plus port-only linkStatus(12) and srcAddrChanges(16) and concentrator-only collBackOffErr(22). It decides which conditions are allowed, so set it first, for example crcPkts for a cabling-error alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.6 snmpwalk -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.6.1 snmpget -v2c -c public <target> SYNOPTICS-ETHERNET-MIB::s3EnetThreshType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.2.8.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> s3EnetThreshType.1
Start monitoring SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-ETHERNET-MIB::s3EnetThreshType OID value, configure state conditions and alerts, and monitor any SynOptics Series 3000 Ethernet concentrators/hubs, NMM/NMM+ agents, legacy (hub/board/port status and security) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.2 | s3000Ethernet | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.8 | s3000EnetThreshold | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1 | s3EnetThreshTable | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1.1 | s3EnetThreshEntry | SYNOPTICS-ETHERNET-MIB |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.6 | s3EnetThreshType | SYNOPTICS-ETHERNET-MIB |